Yazar "Belli, S" seçeneğine göre listele
Listeleniyor 1 - 19 / 19
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Effect of EDTA and citric acid solutions on the microhardness and the roughness of human root canal dentin(ELSEVIER SCIENCE INC, 2005) Eldeniz, AU; Erdemir, A; Belli, SThe purpose of this study was to evaluate the effect of citric acid and EDTA solutions on the microhardness and the roughness of human root canal dentin. Forty-five human teeth sectioned longitudinally were used. Specimens were randomly divided into three groups of 30 teeth each and were treated as follows: (a) one molar (19%) citric acid (C6H8O7) for 150 s followed by 5.25% NaOCl; (b) 17% EDTA for 150 s and rinsed with 5.25% NaOCl; (c) rinsed with distilled water and served as control. Three groups were then divided into two subgroups of 15 specimens each. The specimens, in first subgroup were subjected to Vicker's testing whereas the second subgroup underwent surface roughness testing. The results were analyzed using one-way ANOVA and Tukey tests. Significant differences were observed in microhardness among the test groups, citric acid group being the least hard (p 0.05). Also, citric acid significantly increased surface roughness.Öğe The effect of fibre insertion on fracture resistance of root filled molar teeth with MOD preparations restored with composite(WILEY, 2005) Belli, S; Erdemir, A; Ozcopur, M; Eskitascioglu, GAim To evaluate the effect of using flowable composite with or without leno woven ultra high modulus polyethylene fibre reinforcement on fracture resistance of root filled mandibular molars with mesio-occluso-distal (MOD) preparations. Methodology Sixty sound extracted human mandibular molars were randomly assigned to five groups (n = 12). Group 1 did not receive any preparation. From groups 2 to 5, the teeth were root filled and MOD preparations were created. Group 2 remained unrestored. Group 3 was restored with a dentine bonding system (DBS; SE Bond, Kuraray, Japan) and composite resin (CR) (AP-X; Kuraray). In group 4, flowable composite resin (Protect Liner F; Kuraray) was used before restoring teeth with CR. In group 5, leno woven ultra high modulus polyethylene ribbon fibre (Ribbond, Seattle, WA, USA) was inserted into the cavities in a buccal to lingual direction and the teeth were then restored with DBS and CR. After finishing and polishing, the specimens were stored in 100% humidity at 37 degreesC for 1 day. Compressive loading of the teeth was performed using a universal testing machine at a crosshead speed of 0.5 mm min(-1). The mean load necessary to fracture the samples were recorded in newtons (N) and were subjected to analysis of variance (anova) and Tukey post-hoc test. Results The mean load necessary to fracture the samples in each group were (in N): group 1: 1676.75 +/-154.63(a), group 2: 376.51 +/- 37.36(b), group 3: 733.23 +/- 133.33(c), group 4: 786.48 +/- 145.34(c), group 5: 943.63 +/- 121.15(d). There were statistically significant differences between the groups annotated with different letters. Conclusions (i) Use of flowable composite resin under composite restorations had no effect on fracture resistance of root filled molar teeth with MOD preparations, (ii) use of polyethylene ribbon fibre under composite restorations in root filled teeth with MOD preparations significantly increased fracture strength.Öğe Effect of gutta-percha solvents on mineral contents of human root dentin using ICP-AES technique(LIPPINCOTT WILLIAMS & WILKINS, 2004) Erdemir, A; Eldeniz, AU; Belli, SThe purpose of this in vitro study was to evaluate the mineral contents of root-canal dentin before and after treatment with two commonly used gutta-percha solvents: chloroform and halothane. Twenty extracted human premolars, whose crowns and apical thirds had been removed, were used. Pulp tissues were removed and the teeth were randomly divided into two groups including 10 teeth each. Root canals were enlarged with Gates Glidden burs (#1, 2, and 3). Dentin chips were obtained and saved in plates to serve as a control. Root-canal-dentin walls were then treated with chloroform or halothane for 15 min. Dentin chips were again obtained using Gates Glidden burs (#4, 5, and 6). The levels of five elements, calcium, phosphorus, magnesium, potassium, and sulfur, in each specimen were analyzed using ICP-AES (inductively coupled plasma atomic emission spectrometry) technique. Changes in the levels of the chemical elements were recorded. Differences between the groups were statistically analyzed using Mann-Whitney U test. There was a significant decrease in Ca level and significant increase in Mg level after treatment with halothane (p < 0.05). There was a significant increase in Mg level after treatment with chloroform. The changes in other elements levels after treatment with gutta-percha solvents were minimal and statistically not significant (p > 0.05). As a result it was concluded that gutta-percha solvents have effect on mineral contents of root dentin.Öğe Effect of hybrid layer on stress distribution in a premolar tooth restored with composite or ceramic inlay: An FEM study(WILEY-LISS, 2005) Belli, S; Eskitascioglu, G; Eraslan, O; Ssenawongse, P; Tagami, JThe aim of this finite elemental stress analysis study was to evaluate the effect of hybrid layer on distribution and amount of stress formed under occlusal loading in a premolar tooth restored with composite or ceramic inlay. The mandibular premolar tooth was selected as the model based on the anatomical measurements suggested by Wheeler. The analysis is performed by using a Pentium II IBM compatible computer with the SAP 2000 structural analysis program. Four different mathematical models including the following structures were evaluated: 1) composite inlay, adhesive resin, and tooth structure; 2) composite inlay, adhesive resin, hybrid layer, and tooth structure; 3) ceramic inlay, adhesive resin, and tooth structure; 4) ceramic inlay, adhesive resin, hybrid layer, and tooth structure. Loading was applied from the occlusal surface of the restoration, and shear stresses under loading were evaluated. The findings were drawn by the Saplot program, and the results were analyzed by graphical comparison method. The output indicated that the hybrid layer acts as a stress absorber in models 2 and 4. The hybrid layer has also changed mathematical values of stress on cavity floors in both restoration types. Ceramic inlay collected the stress inside the body of the material, but the composite inlay directly transferred the stress through dental tissues. As a result, it was concluded that the hybrid layer has an effect on stress distribution under loading in a premolar tooth model restored with composite or ceramic inlay. (c) 2005 Wiley Periodicals, Inc.Öğe Effect of medications for root canal treatment on bonding to root canal dentin(LIPPINCOTT WILLIAMS & WILKINS, 2004) Erdemir, A; Ari, H; Gungunes, H; Belli, SUse of resin-based restorative materials recently has become widely accepted for treatment of endodontically treated teeth. However, some solutions routinely used during endodontic treatment procedures may have an effect on bond strengths of adhesive materials to root canal dentin. The purpose of this in vitro study was to evaluate the effect of various medications on microtensile bond strength to root canal dentin. Fourteen extracted human single-rooted teeth were used. The crowns and the pulp tissues were removed. The root canals were then instrumented and widened to the same size. The teeth were randomly divided into seven groups of two teeth each. The root canal dentin walls of the roots were treated with 5% sodium hypochloride (NaOCl), 3% hydrogen peroxide (H2O2), the combination of H2O2 and NaOCl, or 0.2% chlorhexidine gluconate for 60 s; or calcium hydroxide or formocresol for 24 h. The teeth in control group were irrigated with water. The root canals were obturated using C&B Metabond. After 24 h of storage in distilled water,serial 1-mm-thick cross-sections were cut, and approximately 12 samples were obtained from each group. Microtensile bond strengths to root canal dentin were then measured by using an Instron machine. The data were recorded and expressed as MPa. The results indicated that NaOCl, H2O2, or a combination of NaOCl and H2O2 treatment decreased bond strength to root canal dentin significantly (p < 0.05). The teeth treated with chlorhexidine solution showed the highest bond strength values (p < 0.05). In conclusion, chlorhexidine is an appropriate irrigant solution for root canal treatment before adhesive post core applications.Öğe Effect of solvents on bonding to root canal dentin(LIPPINCOTT WILLIAMS & WILKINS, 2004) Erdemir, A; Eldeniz, AU; Belli, S; Pashley, DHThe long-term success of resin cementation of post/cores is likely increased with improvement in resin-root canal dentin bonding. The adverse effect of some irrigation constituents (NaOCl, H2O2) or medications (eugenol) on the bond strengths of resins to dentin have been reported. The purpose of this in vitro study was to evaluate the effect of two gutta-percha solvents (chloroform versus halothane) on microtensile bond strength to root canal dentin. Thirty, extracted, human, single-rooted teeth were instrumented to a #70 file and randomly divided into 3 groups of 10 each. The root canals were treated with water, chloroform, or halothane for 60 s. All root canals were obturated using C&B Metabond. After 24 h of storage in distilled water, serial 1-mm-thick cross-sections were cut and trimmed. Microtensile bond strength to apical, middle, and coronal root canal dentin were measured using an Instron machine. Using pooled data, the results indicated that water-treated roots had significantly higher resin-dentin bond strengths compared with chloroform or halothane treatment groups (control: 23.9 MPa; chloroform: 18.3 MPa; halothane: 17 MPa; p < 0.05). Gutta-percha solvents have an adverse effect on bond strengths of adhesive cements to root canal dentin.Öğe Effect of the gutta-percha solvents on the microhardness and the roughness of human root dentine(WILEY, 2004) Erdemir, A; Eldeniz, AU; Belli, SThe purpose of this in vitro study was to evaluate the effect of gutta-percha solvents on the microhardness and the roughness of human root dentine. Forty-five recently extracted human mandibular anterior teeth were used. The teeth were sectioned longitudinally, embedded in acrylic resin and polished. Ninety specimens were divided into three groups containing 30 teeth each. In group 1, the specimens were treated with chloroform for 15 min. In group 2, the specimens were treated with halothane for 15 min. In group 3, distilled water was used and this group was served as control. All groups were then divided into two subgroups of 15 specimens each. The specimens, in groups 1a, 2a and 3a, were submitted to Vicker's microhardness indentations. Groups 1b, 2b and 3b were used for determination of the roughness of root dentine. The data were recorded as Vicker's numbers and Ra, mum for roughness test. The results were then analysed by one-way ANOVA and post hoc Tukey tests. The results indicated that chloroform and halothane did not affect the microhardness and the roughness of root dentine (P > 0.05).Öğe Evaluation of the effect of endodontic irrigation solutions on the microhardness and the roughness of root canal dentin(ELSEVIER SCIENCE INC, 2004) Ari, H; Erdemir, A; Belli, SThe purpose of this study was to evaluate the effect of 0.2% chlorhexidine gluconate on the microhardness and roughness of root canal dentin compared with widely used irrigation solutions. Ninety, mandibular, anterior teeth extracted for periodontal reasons were used. The crowns of the teeth were removed at the CEJ. The roots were separated longitudinally into two segments, embedded in acrylic resin, and polished. A total of 180 specimens were divided into 6 groups of 30 teeth at random according to the irrigation solution used: group 1: 5.25% NaOCl for 15 min; group 2: 2.5% NaOCl for 15 min; group 3: 3% H2O2 for 15 min; group 4: 17% EDTA for 15 min; group 5: 0.2% chlorhexidine gluconate for 15 min; and group 6: distilled water (control). Each group was then divided into 2 subgroups of 15 specimens: groups 1a, 2a, 3a, 4a, 5a, and 6a were submitted to Vickers microhardness indentation tests; groups 1b, 2b, 3b, 4b, 5b, and 6b were used for determination of the roughness of root dentin. The data were recorded as Vickers numbers and Ra, mum for roughness test. The results were analyzed statistically by using one-way ANOVA and Tukey tests. The results indicated that all the irrigation solutions except chlorhexidine significantly decreased microhardness of root canal dentin (p < 0.05); 3% H2O2 and 0.2% chlorhexidine gluconate had no effect on roughness of the root canal dentin (p > 0.05). Although there are many other factors for irrigation solution preference, according to the results of this study, 0.2% chlorhexidine gluconate seems to be an appropriate endodontic irrigation solutions because of its harmless effect on the microhardness and roughness of root canal dentin.Öğe Evaluation of the influence of smear layer on the apical and coronal sealing ability of two sealers(ELSEVIER SCIENCE INC, 2004) Cobankara, FK; Adanir, N; Belli, SThe aim of this in vitro study was to determine the effect of the smear layer on apical and coronal leakage in root canals obturated with AH26 or RoekoSeal sealers. A total of 160 maxillary anterior teeth extracted for periodontal reasons were used. The root canals were prepared to a size #7 with ProFile .06 taper Series 29 rotary instruments in a crown-down manner. Eight groups were created by all possible combinations of three factors: smear layer (present/absent), leakage assessment (apical/coronal), and sealer used (AH26/RoekoSeal). All teeth were obturated using lateral condensation technique of gutta-percha. A fluid filtration method was used to test apical or coronal leak age. According to the results of this study, the smear (+) groups displayed higher apical and coronal leakage than those smear (-) groups for both root canal sealers (p < 0.05). There was no statistically significant difference in either apical or coronal leakage between RoekoSeal and AH26, regardless of the presence or absence of the smear layer (p > 0.05). However, apical leakage was significantly higher than coronal leakage for both root canal sealers used in this study (p < 0.05). Under the conditions of this study, the results indicate that removal of the smear layer has a positive effect in reducing apical and coronal leakage for both AH26 and RoekoSeal root canal sealers.Öğe An in vitro comparison of adhesive systems to seal pulp chamber walls(BLACKWELL PUBLISHING LTD, 2004) Ozturk, B; Ozer, F; Belli, SAim To compare in vitro the sealing properties of five different dentine adhesive materials (Prime&Bond NT (PBNT): Prompt L-Pop (PLP): Clearfil SE Bond (CSEB): Scotchbond Multi Purpose Plus (SMPP): EBS-Multi (EBSM)) inside the pulp chamber. Methodology Seventy-five recently extracted human molar teeth were used. The roof of the pulp chambers and roots were removed under water cooling. Pulp tissue was removed. and the canal orifices were scaled. The pulp chambers were then treated with 51% sodium hypochlorite (NaOCl) for 1 min. The teeth were randomly divided into five groups of 15 teeth each. Adhesive systems were applied to the pulp chamber walls according to the manufacturers' instructions. The samples were connected to Plexiglass plates. and a fluid filtration met hod was used for quantitative evaluation of leakage. Measurements of fluid movement were made at 2-min intervals for S min. The quality of seal of each specimen was measured immediately after 24 h. 1 week and 1 month. The data were statistically analysed by repeated-measurements multivariate ANOVA, Friedman test. Wilcoxon signed rank test. Kruskal-Wallis of one-way ANOVA and Mann-Whitney U-tests. The pulp chamber wall with and without NaOCl and resin-dentine interfaces of specimens were observed under a scanning electron microscope (SEM). Results The leakage values of the materials were significantly different. at. different measurement periods. In all groups, leakage values decreased with time (P < 0.05). PBNT and PLP had the least leakage during immediate measurements (11 < 0.05). After 1 month, leakage of all adhesive systems was not significantly different (P < 0.05). SEM observation Of Pull) chamber walls demonstrated that the irregular dentine surface without smear layer was present in the nontreated group. However, NaOCl application removed the collagen fibrils leaving the dentine surface smooth. At resin-dentine interfaces of specimens, no hybridization zone was observed. Conclusions None of the materials had created a perfect seal to the Pulp chamber walls. PBNT and PLP had better sealing over the short term, but over the long term, there were no differences between the materials.Öğe The in vitro effect of pulpal pressure and luting agent on tensile bond strength of complete cast crowns(MOSBY-ELSEVIER, 2004) Ozturk, AN; Belli, S; Eskitascioglu, GStatement of problem. The degree to which pulpal pressure may affect bond strength of complete cast crowns is unknown. Purpose. The aim of this in vitro study was to evaluate the effect of simulated pulpal pressure on the tensile bond strength of complete cast crowns luted with 2 different cements. Material and methods. Forty-eight human mandibular canine teeth were cleaned and stored in saline solution. The crowns were prepared by I investigator, and standardization of the preparation was accomplished by fixing a dental handpiece in a parallelometer. Uniform grooves, 0.5 mm in depth, were prepared with burs with depth guides. The complete crowns were prepared with a 0.5-mm shoulder margin. Teeth were randomly divided into 2 groups of 24 teeth each (Group I and Group 11). In Group 1, bonding and tensile test procedures of the teeth were carried out under simulated pulpal pressure (15 cm of saline solution). In Group 11, simulated pulpal pressure was not used. The roots were removed I mm below the cementoenamel junction to create direct communication with the pulp chamber. The remaining pulpal tissues were carefully removed, and crowns were embedded in acrylic resin. The acrylic resin was then penetrated by a stainless steel tube that connected the pulp chamber and the barrel of a disposable plastic 5-ml syringe. The pulp chambers were filled with physiological saline solution under elevated pressure to locate the area of greatest permeability on the dentinal surface. Crowns were cast (Co-Cr alloy) with a 20-mm bar to allow testing of the bond strength. Each of the 2 groups were further divided into 2 luting cement groups of 12 each (Group 1, A and 13, and Group 11, A and B). Group IA/IIA and Group IB/IIB specimens were luted with a polycarboxylate luting cement (Poly-F Plus) and an adhesive luting cement (Superbond C&B), respectively. After storage in distilled water for 24 hours, all specimens were subjected to a tensile bond test in a universal testing machine at a crosshead speed of 0.5 mm/min until failure. The maximum load at fracture (Newton) was recorded. The results were then evaluated with 2-way analysis of variance and Tukey's honestly significant difference tests (alpha = .05). Results. Simulated pulpal pressure increased the bond strength of cast complete crowns cemented with all adhesive luting agent (P = .01). No significant difference was found in the bond strength of complete cast crowns cemented with polycarboxylate cement with or without pupal pressure. Superbond C&B adhesive luting agent showed significantly higher bond strength values for Group 1 (388.9 +/- 32.7) and Group 11 (300.9 +/- 66.8), when compared with polycarboxylate cement for Group 1 (221.3 +/- 17.3) and Group 11 (186.8 +/- 38.5) (P = .001). Conclusion. Simulated pulpal pressure had a positive effect on the retention of complete cast crowns when cemented with Superbond C&B adhesive luting agent. Superbond C&B significantly increased the retention of crowns in either the presence or absence of pulpal pressure.Öğe Microleakage of endodontically treated teeth with different dowel systems(MOSBY-ELSEVIER, 2004) Usumez, A; Cobankara, FK; Ozturk, N; Eskitascioglu, G; Belli, SStatement of problem. Several new esthetic dowel systems are available for the restoration of endodontically treated teeth, but little is known about how effectively these dowels seal the restored teeth. Purpose. The purpose of this in vitro study was to compare microleakage of 3 esthetic, adhesively luted dowel systems with a conventional dowel system. Material and methods. The root canals of 41 human intact single-rooted extracted teeth were prepared using a step-back technique. The teeth were randomly divided into 4 experimental groups (n=10), and I tooth served as a positive control. The decoronated roots were obturated with gutta-percha using lateral condensation. Roots were restored with I of the following dowel systems according to the manufacturer's instructions: (1) stainless steel dowels (ParaPost), (2) glass fiber dowels (Snowpost), (3) resin-supported polyethylene fiber (Ribbond) dowels, or (4) zirconia dowels (Cosmopost). Using a fluid filtration method, coronal leakage of the specimens along the dowel space and root canal restorative material was measured. Fluid movement measurements were made at 2-minute intervals for 8 minutes to measure the presence of voids existing in the obturated canals, at I week, 3 months, and 6 months following dowel insertion. A repeated-measures analysis of variance (ANOVA) was used to analyze logarithmic transformations of data (time and dowel material) for significant differences. The Tukey HSD test and paired 2-tailed tests were used to perform multiple comparisons (alpha=.05). Results. The data indicated that the leakage values varied according to the dowel system used (P<.01). There was significant interaction between dowel systems and time of testing (P<.01). The sealing ability of zirconia dowels decreased over time (P<.01), but sealing abilities of stainless steel and resin-supported polyethylene fiber dowels remained constant (P>.05). The sealing ability of glass fiber dowels increased at 3 months (P=.032) and remained constant over the next 3 months (P=.758). Statistically, resin-supported polyethylene fiber and glass fiber dowels showed the lowest coronal leakage when compared with stainless steel and zirconia dowels at all time periods (P<.01). There were no significant differences between resin-supported polyethylene fiber and glass fiber dowels at any time period. The initial leakage measurement in zirconia dowel and stainless steel dowels were similar (P=.914), but became significantly different at 3 and 6 months (P<.01). Conclusion. Resin-supported polyethylene fiber dowels and glass fiber dowels tested exhibited less microleakage compared to zirconia dowel systems. The latter system should be further evaluated because of its unacceptable level of leakage.Öğe The quantitative evaluation of apical sealing of four endodontic sealers(ELSEVIER SCIENCE INC, 2006) Cobankara, FK; Orucoglu, H; Sengun, A; Belli, SThe aim of this in vitro study was to evaluate the apical seal obtained with four root canal sealers: Rocanal 2, Sealapex, AH Plus, and RC Sealer. Forty root canals were prepared using the step-back technique. The specimens were divided into four groups of 10 samples and obturated by laterally condensed gutta-percha with one of the tested sealers. The computerized fluid filtration method was used for evaluation of apical sealing properties. The quantitative apical leakage of each specimen was measured after 7, 14, and 21 days. Statistical analysis indicated that the apical leakage of all sealers used in this study decreased gradually from 7 days to 21 days (p < 0.05). Sealapex showed better apical sealing than the other sealers at 7, 14, and 21 days (p < 0.05). RC Sealer, AH Plus, and Rocanal 2 showed similar apical leakage values at every period (p > 0.05).Öğe Reinforcement effect of polyethylene fibre in root-filled teeth: comparison of two restoration techniques(WILEY, 2006) Belli, S; Erdemir, A; Yildirim, CTo compare in vitro two different fibre placement techniques on reinforcement of root-filled molar teeth with mesio-occluso-distal (MOD) cavities. Fifty sound extracted human mandibular molars were used (n = 10). Group 1 served as control. From group 2-5, endodontic access and standard MOD cavities were prepared. Following root canal treatment, group 2 was kept unrestored. In groups 3 and 4, the teeth were restored with composite resin (AP-X; Kuraray, Japan). A groove was prepared on occlusal surface of the finished restorations in group 4 from buccal to lingual direction. Polyethylene woven fibre (Ribbond; Seattle, WA, USA) was inserted in the groove in combination with flowable resin that was cured for 20 s and covered with composite resin. Cavity surfaces were covered with flowable resin in group 5, and polyethylene fibre was placed into the bed of resin in a buccal to lingual direction before the composite restoration was placed. All specimens were stored in 100% humidity at 37 degrees C for 24 h. Compressive loading of the teeth was performed by a universal testing machine at a crosshead speed of 0.5 mm min(-1) until failure. The data were recorded in Newton and submitted to ANOVA and Tukey post hoc test. The mean load necessary to fracture the samples in each group was: G1: 1671.57 +/- 131.54(a); G2: 375.21 +/- 34.30(b); G3: 749.47 +/- 124.54(c); G4: 1224.36 +/- 132.17(d); G5: 926.88 +/- 118.28(e). Different superscript letters demonstrate significant difference between groups. Polyethylene fibre use over or under MOD composite restorations significantly increased fracture strength. However, when the fibre was placed on the occlusal surface of the restoration in buccal to lingual direction, significantly higher fracture resistance was observed.Öğe Sealing properties of different resin-based root canal sealers(WILEY, 2006) Adanir, N; Cobankara, FK; Belli, SIn this study, a comparison of the sealing properties of three different resin-based sealers, AH26, Diaket, and EndoREZ with those of the root canal sealer zinc oxide-eugenol-based U/P Root Canal Sealer was performed. Eighty extracted single-rooted human mandibular first premolar teeth were used. The coronal part of each tooth was removed at the apical 17-mm of roots. The root canals were prepared to a size 7 with ProFile 0.06 taper Series 29 rotary instruments in a crown-down manner before lateral condensation of gutta-percha with the tested sealers (n = 20). A fluid filtration method was used for quantitative evaluation of apical leakage. Statistical analysis revealed that there were no significant differences between the resin-based sealers groups (AH26, Diaket, and EndoREZ) (P > 0.05). UIP Root Canal Sealer, zinc oxide-eugenol-based sealer, leaked significantly more than other tested groups (p < 0.05). Under the limitations of this study, resin-based root canal sealers were found more effective in sealing root canals than the zinc oxide-eugenol-based sealer. (c) 2005 Wiley Periodicals. Inc.Öğe Shear bond strength of three resin based sealers to dentin with and without the smear layer(ELSEVIER SCIENCE INC, 2005) Eldeniz, AU; Erdemir, A; Belli, SBond strength of root canal sealers to dentin is an important property for the integrity of the sealings of root-canals. The purpose of this study was to test shear bond strength of three endodontic sealers (Diaket, AH Plus and Endo-REZ). The coronal two thirds of ninety extracted human third molars were removed. The smear layer of the exposed dentin surfaces were removed using 17% EDTA followed by 5.25% NaOCl and the teeth were randomly divided into two groups (n = 45). Group 1 was kept as control and in group 2, uniform smear layer was created using waterproof polishing papers. Three-mm long sections of polyethylene tubing were filled with freshly mixed sealer and placed on the dentin surfaces for conducting a shear bond strength test. The data was calculated as MPa and was statistically analyzed using a two way ANOVA, Kruskal-Wallis and Mann-Whitney U tests. A significant difference was found among the bond strength of the sealers, smear layer, and control groups. AH Plus sealer showed the highest bond strength in smear layer removed surfaces (p < 0.05). Pretreatment with EDTA/NaOCl affected bond strength of AH Plus. AH Plus had the highest bond to dentin with or without smear layer.Öğe Three-year clinical evaluation of fiber-reinforced composite fixed partial dentures using prefabricated pontics(QUINTESSENCE PUBLISHING CO INC, 2006) Unlu, N; Belli, SPurpose: The purpose of this study was to evaluate the clinical performance of surface-retained adhesive composite fixed partial dentures reinforced by an ultra-high molecular weight polyethylene (UHMWP) fiber (Ribbond THM). Materials and Methods: Twenty-three surface-retained fiber reinforced composite (FRC) fixed partial dentures (FPD) were placed by two operators in 23 patients, each with a single missing tooth. The restorations included prefabricated composite resin pontics, and no preparations were done on the lingual surfaces of the abutment teeth. The patients were recalled for examinations every year for up to 3 years. Restorations were evaluated directly using the modified Ryge criteria. The minimum observation period was 1 year and the maximum observation period was 3 years. Results: At baseline, 23 restorations were graded as Alpha for all parameters. At one year and two years (n = 21), three Bravos for wear resistance and surface texture/gingival inflammation and two Bravos for color match were observed. Twenty-one of 23 restorations were retained at the end of two years (91.3%) and 78.3% were retained after a maximum of 3 years. Conclusion: The results of this clinical study suggest that UHMWP FRC FPDs are quite acceptable at least for three years. However, further clinical investigations are still needed for improved long-term clinical performance.Öğe Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives(SAGE PUBLICATIONS INC, 2005) Donmez, N; Belli, S; Pashley, DH; Tay, FRThe morphologic correlates of bond degradation in self-etching primers have not been fully elucidated. We hypothesized that there is no difference between the mechanism of degradation of self-etching primers in vivo and in vitro. Class I cavities prepared in vivo in 24 caries-free human molars were bonded with Clearfil SE Bond or Clearfil Protect Bond, and restored with resin composites. Eight teeth were extracted after 24 hrs, and the rest after 1 yr. The same protocol was repeated in vitro with extracted molars. Degradation of resin-dentin bonds was assessed by microtensile bond testing and TEM of interfaces after tracer immersion. Both in vivo and in vitro bond strengths decreased with time for SE Bond but not for Protect Bond, with more pronounced water treeing observed in the former adhesive under both aging conditions. There is no difference between the mechanism of degradation of self-etch adhesives in vivo or in vitro.Öğe Use of polyethylene ribbon to create a provisional fixed partial denture after immediate implant placement: A clinical report(MOSBY-ELSEVIER, 2004) Eskitascioglu, G; Eskitascioglu, A; Belli, SProvisional restorations are generally necessary to restore lost function and esthetics during the implant integration period. This article describes the fabrication of an esthetic, economic, and conservative bonded provisional fixed partial denture for a patient restored with implants. A reinforcing polyethylene ribbon was used to bond the natural lateral incisors to the adjacent teeth. An acceptable esthetic outcome was obtained, and the result was satisfactory to the patient.
