Yazar "Tuncdemir, Ali Riza" seçeneğine göre listele

Listeleniyor 1 - 6 / 6
  • Küçük Resim
    Öğe
    Comparison of Mechanical Properties of Aged All-Ceramic Materials
    (Selçuk Üniversitesi, 2023 Ağustos) Temizci, Tuğba; Tuncdemir, Ali Riza
    Background: Our research aimed to compare the biaxial flexural strength of glass ceramic and two different monolithic zirconias after aging, examine the fracture surfaces with scanning electron microscopy (SEM) and perform elemental analysis with energy dispersive spectroscopy (EDS). Methods: Two types of monolithic CAD/CAM materials (Katana UTML and Prettau Anterior) and a lithium disilicate material (IPS emax Press) were selected for this study. All samples were aged with a thermal cycle of 10000 cycles. The biaxial flexural strength of the disc specimens was determined using the three-ball piston test and a universal testing machine. Biaxial flexural strengths were compared for each group (n = 10). All fractured samples were examined by SEM and elemental analyzes were performed with EDS. Data were analyzed by 1-way ANOVA and Tukey post hoc (p<0.05). Results: Prettau Anterior showed a statistically significant difference between the other groups (p<0.05). Following Prettau Anterior (1141.81 MPa), IPS Emax Press (278.86 MPa) and Katana UTML (216.14 MPa) showed biaxial flexural strength, respectively. Conclusion: Compared to the other materials evaluated, Prettau Anterior had much higher biaxial flexural strength. Katana UTML and IPS emax Press show similar strength over the long term. It is seen that the chemical structure of the materials has an effect on the mechanical capacity.
  • Küçük Resim Yok
    Öğe
    The effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement
    (KOREAN ACAD PROSTHODONTICS, 2013) Tuncdemir, Ali Riza; Yildirim, Cihan; Ozcan, Erhan; Polat, Serdar
    PURPOSE. The purpose of this study was to compare the effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement. MATERIALS AND METHODS. Fifty-five incisors extracted due to periodontal problems were used. All teeth were instrumented using a set of rotary root canal instruments. The post spaces were enlarged for a No.14 (diameter, 1.4 mm) Snow light (Abrasive technology, OH, USA) glass fiber reinforced composite post with matching drill. The teeth were randomly divided into 5 experimental groups of 11 teeth each. The post spaces were treated with the followings: Group 1: 5 mL 0.9% physiological saline; Group 2: 5 mL 5.25% sodium hypochlorite; Group 3: 5 mL 17% ethylene diamine tetra acetic acid (EDTA), Group 4: 37% orthophosphoric acid and Group 5: Photodynamic diode laser irradiation for 1 minute after application of light-active dye solution. Snow light posts were luted with self-adhesive resin cement. Each root was sectioned perpendicular to its long axis to create 1 mm thick specimens. The push-out bond strength test method was used to measure bond strength. One tooth from each group was processed for scanning electron microscopic analysis. RESULTS. Bond strength values were as follow: Group 1 = 4.15 MPa; Group 2 = 3.00 MPa; Group 3 = 4.45 MPa; Group 4 = 6.96 MPa; and Group 5 = 8.93 MPa. These values were analysed using one-way ANOVA and Tukey honestly significant difference test (P<.05). Significantly higher bond strength values were obtained with the diode laser and orthophosphoric acid (P<.05). There were no differences found between the other groups (P>.05). CONCLUSION. Orthophosphoric acid and EDTA were more effective methods for removing the smear layer than the diode laser. However, the diode laser and orthophosphoric acid were more effective at the cement dentin interface than the EDTA, Therefore, modifying the smear layer may be more effective when a self-adhesive system is used.
  • Küçük Resim Yok
    Öğe
    The effect of luting cement thicknesses on the push-out bond strength of the fiber posts
    (TAYLOR & FRANCIS LTD, 2013) Ozcan, Erhan; Cetin, Ali Riza; Tuncdemir, Ali Riza; Ulker, Mustafa
    Objective. The aim of this study was to evaluate the effect of luting cement thicknesses on the push-out bond strength of the fiber posts. Materials and methods. Sixty human maxillary canine teeth were endodontically treated. Post spaces were prepared and root specimens randomly divided into three groups: Group 1: etch-and-rinse (Variolink II/Exite DSC), Group 2: self-etch (Panavia F2.0/ED primer) and Group 3: self-adhesive (Clearfil SA Cement). Then each group was divided into four sub-groups according to the cement thickness, as follows: Sub-group 1: 0.35 mm, Sub-group 2: 0.25 mm, Sub-group 3: 0.15 mm, and Sub-group 4: 0.05 mm. Three slices of 1 mm thickness were obtained from each root specimen (n = 15). Push-out tests were performed and data was analyzed with two-way ANOVA and Tukey tests. Results. The etch-and-rinse system (Variolink II) had a significantly higher bond strength compared with the other systems (p < 0.05). The thickest cement group (0.35 mm) had a significantly lower bond strength compared with the 0.15 and 0.05 mm groups in the etch-and-rinse and self-adhesive groups (p < 0.05). In the self-etch group, the cement thicknesses did not significantly affect the bond strength (p > 0.05). Conclusions. The etch-and-rinse system offered better bonding to root dentine than the self-adhesive and self-etch systems. The increases in cement thickness significantly reduced the bond strength of fiber posts to root dentine for both the etch-and-rinse and self-adhesive systems.
  • Küçük Resim Yok
    Öğe
    Effects of different surface treatments on shear bond strength in two different ceramic systems
    (SPRINGER LONDON LTD, 2013) Yavuz, Tevfik; Dilber, Erhan; Kara, Haluk Baris; Tuncdemir, Ali Riza; Ozturk, A. Nilgun
    The purpose of this study was to evaluate the influence of different surface treatments (sandblasting, acid etching, and laser irradiation) on the shear bond strength of lithium disilicate-based core (IPS Empress 2) and feldspathic ceramics (VITA VM 9). One hundred ceramic discs were divided into two groups of 50 discs each for two ceramic systems: IPS Empress 2 (group I) and VITA VM 9 (group II). Each of the two groups was further divided into five surface treatment groups (ten each) as follows: group SB, sandblasting with alumina particles (50 mu m); group HF, 5 % hydrofluoric acid etching; group L, Er:YAG laser irradiation (distance, 1 mm; 500 mJ; 20 Hz; 10 W; manually, noncontact R14 handpiece); group SB-L, sandblasting + Er:YAG laser; and group HF-L, 5 % hydrofluoric acid + Er:YAG laser. Luting cement (Panavia 2.0) was bonded to the ceramic specimens using Teflon tubes. After 24 h of water storage, a shear bond strength test was performed using a universal testing machine at a crosshead speed of 0.5 mm/min. The data were analyzed with a two-way analysis of variance (ANOVA) and Tukey's honestly significant difference tests (alpha = 0.05). The two-way ANOVA indicated that the shear bond strength was significantly affected by the surface treatment methods (p < 0.05), but there was no significant interaction between the ceramic systems. Group SB-L had the highest mean values for each ceramic system. Sandblasting, followed by Er:YAG laser irradiation, enhanced the bond strength, indicating its potential use as an alternative method. The atomic force microscopic evaluation revealed that group SB had the most distinct sharp peaks among the groups.
  • Küçük Resim Yok
    Öğe
    Effects of fibers on the color change and stability of resin composites after accelerated aging
    (JAPANESE SOC DENTAL MATERIALS DEVICES, 2012) Tuncdemir, Ali Riza; Aykent, Filiz
    Composite resins were reinforced with glass and polyethylene fibers in this study, and the effect of fiber reinforcement on the color change of composite resins was investigated. After accelerated aging, the effect of fiber reinforcement on the color stability of composite resins was also examined. There were three experimental groups (n=12 disks per group): non-fiber-reinforced composite (non-FRC control), polyethylene fiber (Ribbond-THM)-reinforced composite, and glass fiber (everstick NET)-reinforced composite. According to the critical remarks of color change of National Bureau of Standarts (NSB), glass fiber-reinforced anterior composites showed trace color change and polyethylene-fiber reinforced composites showed slight color change before accelerated aging. After accelerated aging, both control and fiber-reinforced composite groups showed noticeable color change. It was concluded that both the types of fiber reinforcement and composite resin influenced the color change of fiber-reinforced composite resins.
  • Küçük Resim Yok
    Öğe
    Influence of eugenol on the push-out bond strengths of fiber posts cemented with different types of resin luting agents
    (SPRINGER, 2013) Ozcan, Erhan; Cetin, Ali Riza; Capar, Ismail Davut; Tuncdemir, Ali Riza; Aydinbelge, Hale Ari
    This study evaluated the influence of eugenol on the push-out bond strengths of fiber posts cemented with different types of resin luting agents. Seventy-two extracted maxillary single-rooted canine teeth were randomly divided into two groups of 36 teeth. Group 1, the control group, was filled with gutta-percha only (i.e., did not receive eugenol), whereas group 2 was filled with a eugenol-containing sealer. All root canals were filled and each group was divided into three subgroups. The posts in each subgroup were cemented with the following materials: subgroup 1 with a 2-step self-etching adhesive system (Clearfil Liner Bond 2V + Panavia F); subgroup 2 with a 1-step self-etching adhesive (Panavia F); and subgroup 3 with a self-adhesive (Clearfil SA Cement). Dislodgement resistance was measured using a universal testing machine. All data were subjected to ANOVA using a factorial design and Tukey test (alpha = 0.05). The use of the eugenol-containing sealer significantly reduced the push-out bond strength of the fiber post (P < 0.05). The push-out bond strength of Panavia F was significantly higher than those of the other groups filled with the eugenol-containing sealer (P < 0.05). The Panavia F group was less susceptible to the inhibiting effect of eugenol than were the other evaluated groups when the fiber post was cemented in the canals filled with the eugenol-containing sealer.