Formaldehyde Emission in Different Positions of Wood-Based Boards Used in Interior Architecture
dc.authorid | 0000-0001-5447-1201 | en_US |
dc.authorid | 0000-0003-2607-852X | en_US |
dc.authorid | 0000-0001-5395-6629 | en_US |
dc.contributor.author | Yıldırım, Kemal | |
dc.contributor.author | Çınar, Hamza | |
dc.contributor.author | Erdem, Haldun Ender | |
dc.date.accessioned | 2023-07-11T21:32:06Z | |
dc.date.available | 2023-07-11T21:32:06Z | |
dc.date.issued | 2022 | en_US |
dc.department | Başka Kurum | en_US |
dc.description.abstract | This research focuses on determining the effects on the formaldehyde emission (FE) of the middle and edge parts of two different wood-based boards (WBBs) consisting of medium density fiberboard (MDF) and particleboard (PB), which are widely used in interior architecture. Samples with the thicknesses of 18 mm were analyzed for FE at a temperature of 20 °C and 65% relative moisture content for 1, 2 and 3 hours after manufacture. In the PB samples, the highest value of FE (0.4119 ppm) was determined in the samples obtained from the center while the lowest emission value (0.0875) was observed in the samples obtained from the edge. In the MDF samples, the highest value of FE (0.3012 ppm) was determined in the samples from the center while the lowest emission value (0.1807 ppm) was observed in the samples from the edge. The PBs have a higher environmental impact (0.2497 ppm) than the MDFs (0.2454 ppm). For distances to minimum values (0.10 ppm), while the furthest value for the central samples of PB was 311%, the closest value for the edge samples of PB was -12.5%. | en_US |
dc.identifier.citation | Yıldırım, K., Çınar, H., Erdem, H. E. (2022). Formaldehyde Emission in Different Positions of Wood-Based Boards Used in Interior Architecture. DepArch: Journal of Desing Planning Aesthetics Research, 1, (2), 91-104. doi: 10.55755/DepArch.2022.13 | en_US |
dc.identifier.doi | 10.55755/DepArch.2022.13 | en_US |
dc.identifier.endpage | 104 | en_US |
dc.identifier.issn | 2822-4175 | en_US |
dc.identifier.issue | 2 | en_US |
dc.identifier.startpage | 91 | en_US |
dc.identifier.uri | https://hdl.handle.net/20.500.12395/48474 | |
dc.identifier.volume | 1 | en_US |
dc.language.iso | en | en_US |
dc.publisher | Selcuk University | en_US |
dc.relation.ispartof | DepArch: Journal of Desing Planning Aesthetics Research | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Başka Kurum Yazarı | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.selcuk | 20240510_oaig | en_US |
dc.subject | Formaldehyde Emission | en_US |
dc.subject | Furniture | en_US |
dc.subject | Interior Architecture | en_US |
dc.subject | VOC | en_US |
dc.subject | Wood-Based Boards | en_US |
dc.title | Formaldehyde Emission in Different Positions of Wood-Based Boards Used in Interior Architecture | en_US |
dc.type | Article | en_US |