The effects of solid particle erosion of zm coating material on Gf/Ep and Cf/Ep composites by using PVD method
Yükleniyor...
Dosyalar
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
GAZI UNIV
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Protective coatings produced by using Physical Vapour Deposition (PVD) method can increase the life time of the components. Therefore; in this study, approximate to 0.25 mu m thickness ZrN coatings are applied on Glass Fiber Reinforced Epoxy (GF/EP) and Carbon Fiber Reinforced Epoxy (CF/EP) composites by magnetron sputtering to gain an improved understanding of the erosion resistance. The impingement angles used in the tests were 30 degrees, 60 degrees and 90 degrees, while the impact velocity was 53 m/s. Al2O3 abrasive particles with an average diameter of 200 mu m was used. All test specimens regardless of their various properties exhibit maximum erosion rates at 30 degrees impingement angle and thus exhibiting similar behavior as that observed for ductile materials. Optic microscopic views were performed on the surfaces in order to characterize the erosion mechanism. The erodent particles of the both coating layer and composite matrix were found of main role in governing the wear progression. The measured erosion rates were sensitively correlated with the material removal process in order to explain the changes within the coated interfaces.
Açıklama
Anahtar Kelimeler
Solid particle erosion, ZrN coating, GF/EP, CF/EP, PVD
Kaynak
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
22
Sayı
1
Künye
Bağcı, M. (2019). The Effects of Solid Particle Erosion of Zm Coating Material on Gf/Ep and Cf/Ep Composites by Using PVD Method. Journal of Polytechnic-Politeknik Dergisi, 22(1), 87-93.
