Analysis of the Effect of the Noise Created in the Turning Process on the Cutting Parameters and Surface Roughness

Basit Öğe Kaydı
dc.authoridhttps://orcid.org/0009-0009-8541-6286
dc.authoridhttps://orcid.org/0000-0003-1553-581X
dc.contributor.authorİnan, Cansu
dc.contributor.authorNeşeli, Süleyman
dc.date.accessioned2024-10-24T11:56:42Z
dc.date.available2024-10-24T11:56:42Z
dc.date.issued2024
dc.departmentSelçuk Üniversitesi, Teknoloji Fakültesi, Mekatronik Mühendisliği Bölümü
dc.description.abstractTurning process is a manufacturing method made with single-mouth cutting tools and is quitewidely used. There are many factors that affect the process in the turning process(cuttingparameters, workpiece characteristics, insert characteristics, etc.) are. The selection of these factorsaffecting the cutting process directly affects the surface roughness value and noise ratio that willoccur on the workpiece surface. In this study, the relationships between the noise ratio intensitycaused by the contact on the tool-workpiece interface during the manufacturing processes and thecutting parameters used were analyzed by examining. Under dry turning conditions, Threedifferent revolutions (477, 630, 870 rpm), three different feed rates (0.2, 0.4, 0.6 mm / revolution)and three different chip depths (0.4, 0.6, 0.8 mm) were used according to the 𝐿9 orthogonalexperimental scheme to measure the roughness and noise. It is aimed to determine the mosteffective parameters by evaluating them with graphs obtained from the data. It was concluded thatthe most effective parameters for roughness among the selected parameters were feed rate,revolution speed and chip depth respectively, while the most effective parameters for noise ratiointensity were revolution speed, chip depth and feed rate.
dc.identifier.citationİnan, C., Neşeli, S., (2024) Analysis of the Effect of the Noise Created in the Turning Process on the Cutting Parameters and Surface Roughness. Selcuk University Journal of Engineering Sciences, 23(1), 17-25.
dc.identifier.endpage25
dc.identifier.issn2757-8828
dc.identifier.issue1
dc.identifier.startpage17
dc.identifier.urihttps://hdl.handle.net/20.500.12395/53083
dc.identifier.volume23
dc.institutionauthorİnan, Cansu
dc.institutionauthorNeşeli, Süleyman
dc.institutionauthoridhttps://orcid.org/0009-0009-8541-6286
dc.institutionauthoridhttps://orcid.org/0000-0003-1553-581X
dc.language.isoen
dc.publisherSelçuk Üniversitesi
dc.relation.ispartofSelcuk University Journal of Engineering Sciences
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectCutting Parameters
dc.subjectCutting Tool
dc.subjectSurface Roughness
dc.titleAnalysis of the Effect of the Noise Created in the Turning Process on the Cutting Parameters and Surface Roughness
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
655-3281-1-PB.pdf
Boyut:
524.69 KB
Biçim:
Adobe Portable Document Format
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Dergi Yayın Koleksiyonu