Solid Particle Erosion Wear of GF/EP Composites with Added Al(2)O(3)
Yükleniyor...
Dosyalar
Tarih
2010
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
AMER INST PHYSICS
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
This study has targeted to investigate wear behavior of a sort of new composite material where Al(2)O(3) (approximate to 150 mu m) particles were added to glass fiber and epoxy resin (GF/EP) at an amount of 15% and 30%. The method used in the tests, was the one that use dry and compressed air to accelerate abrasive particles onto a specimen and from there the wear formed was investigated. Striking speed was determined with the help of a double disc method by making use of pressure difference, whereas impinging angles were set by turning the specimen holder around its axis. As a result, in this experimental study, solid particle erosion behavior of a new formed composite material was investigated and erosion rates computed where three different impinging angles (30 degrees, 60 degrees and 90 degrees), three different striking speeds (23, 34 and 53 m/s) and two different fiber directions (0 and 45) were used to enable angular aluminum abrasives with average diameter of 400 mu pm to bombard target specimens to undertake the tests. In addition, the study presents microscopic views of the specimens after undergoing the tests.
Açıklama
International Conference on Advances in Materials and Processing Technologies -- OCT 24-27, 2010 -- Ctr Arts & Metiers ParisTech, Paris, FRANCE
Anahtar Kelimeler
GF/EP, Al(2)O(3), Solid Particle Erosion Wear, Erosion Rate
Kaynak
International Conference on Advances in Materials and Processing Technologies, Pts One and Two
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
1315
Sayı
Künye
Bağcı, M., İmrek, H., (2010). Solid Particle Erosion Wear of GF/EP Composites with Added Al(2)O(3). International Conference on Advances in Materials and Processing Technologies, Pts One and Two, 1315, 1389-1394.
DOI: 10.1063/1.3552380
