The Load Capacity of PC/ABS Spur Gears and Investigation of Gear Damage
Yükleniyor...
Dosyalar
Tarih
2009
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Purpose: Recently, Polyamide 66 and Teflon as plastic materials have been widely used at the manufacturing of gear mechanism. The purpose of the paper is to examinee the load capacity of PC/ABS spur gears and investigation of gear damage. Design/methodology/approach: In this study, usability of PC/ABS composite plastic materials as spur gear was investigated. PC/ABS gears were tested by applying three different loading at two different numbers of revolutions on the FZG experiment set. Findings: As a result of the experiments, load capability of PC/ABS materials was seen rather high, if one of the spur gear pair was steel (AISI 8620). Practical implications: In fact that, PC/ABS materials are durable against flame, air, ultraviolet lights and holding lower moisture than PA66 GFR 30 materials, the usage of them brings an advantage in many industrial areas. Originality/value: Using PC/ ABC materials provides many advantages due to fire, air and ultraviolet light durability and low moisture holding properties.
Açıklama
Anahtar Kelimeler
PC/ABS, Spur gear, Wear
Kaynak
Archives of Materials Science and Engineering
WoS Q Değeri
Scopus Q Değeri
Q3
Cilt
40
Sayı
1
Künye
Yakut, R., Düzcükoğlu, H., Demirci, M. T., (2009). The Load Capacity of PC/ABS Spur Gears and Investigation of Gear Damage. Archives of Materials Science and Engineering, 40(1), 41-46.
