Evaluating the Parameters for Electrode Wear Rate in Electrical Discharge Machining of H13 Steel
Yükleniyor...
Dosyalar
Tarih
2023 Nisan
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Selçuk Üniversitesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, H13 steel, which is widely used in mold making, was processed by the electroerosion method. A copper electrode with a diameter of 12 mm was used in the experiments. Taguchi L18 experiment list was created by using 3 different cutting parameters. At the end of the experiments, electrode wear rates (EWR) were found by controlling the initial and final weights of the electrode. Ampere (A) was the most effective parameter for electrode wear. According to the analysis of variance (ANOVA) results, Amper's contribution rate was 63.99%. At the end of the study, Regression analysis was performed, and a mathematical model was developed for the electrode wear rate.
Açıklama
Anahtar Kelimeler
ANOVA, Electro-erosion, EWR, H13 Steel, Taguchi
Kaynak
Selcuk University Journal of Engineering Sciences
WoS Q Değeri
Scopus Q Değeri
Cilt
22
Sayı
1
Künye
Yaka, H., Malo, Y., (2023). Evaluating the Parameters for Electrode Wear Rate in Electrical Discharge Machining of H13 Steel. Selcuk University Journal of Engineering Sciences, 22(1), 33-37.
