Investigation of friction coefficient for Twaron-Reinforced brake shoe materials

Basit Öğe Kaydı
dc.contributor.authorDemirhan Y.Z.
dc.contributor.authorKus R.
dc.date.accessioned2020-03-26T19:43:50Z
dc.date.available2020-03-26T19:43:50Z
dc.date.issued2017
dc.departmentSelçuk Üniversitesien_US
dc.description5th Asia Conference on Mechanical and Materials Engineering, ACMME 2017 -- 9 June 2017 through 11 June 2017 -- 205559en_US
dc.description.abstractAfter the adverse effects of asbestos used in brake shoes on vehicles were come up, the researches on ecological shoe material have been carried out by many researchers. From this point forth, four different twaron-reinforced composite materials, which could be brake shoes, were produced in this study. Samples were produced in double acting press at a pressure of 100 MPa at 1600C by mixing the components used in powder form in a mixer. The samples were cured at 1600C for 6 hours. After curing, produced samples and those taken from commercial shoes were compared by performing hardness pin-on-disc wear tests (ASTM G99-95). When the results are evaluated in terms of hardness, it was observed that 20% twaron-reinforced sample has the highest hardness (116,88 Rockwell-R), but when evaluated in terms of friction, it was seen that while 5% twaronreinforced sample satisfies highest friction coefficient, 10% twaron-reinforced sample exhibits close values to the commercial brake shoe at varying loads and showed a stable friction performance. © 2017 Trans Tech Publications, Switzerland.en_US
dc.description.sponsorshipSelçuk Üniversitesien_US
dc.description.sponsorshipThe data in this paper were benefited from Master thesis studies of Yusuf Ziya DEMIRHAN. The authors acknowledge the support provided by the Scientific Research Projects Coordinatorship of Selçuk University.en_US
dc.identifier.doi10.4028/www.scientific.net/MSF.909.106en_US
dc.identifier.endpage110en_US
dc.identifier.isbn9.78304E+12
dc.identifier.issn0255-5476en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage106en_US
dc.identifier.urihttps://dx.doi.org/10.4028/www.scientific.net/MSF.909.106
dc.identifier.urihttps://hdl.handle.net/20.500.12395/35765
dc.identifier.volume909 MSFen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTrans Tech Publications Ltden_US
dc.relation.ispartofMaterials Science Forumen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectCompositeen_US
dc.subjectFriction coefficienten_US
dc.subjectHardnessen_US
dc.subjectPin-on discen_US
dc.subjectTwaronen_US
dc.titleInvestigation of friction coefficient for Twaron-Reinforced brake shoe materialsen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu