Porselen yüzeyine lazer uygulamasının metal braketlerin bağlanma dayanıklılığı üzerine etkisi
Yükleniyor...
Dosyalar
Tarih
2015
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Selçuk Üniversitesi Sağlık Bilimleri Enstitüsü
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışmada, farklı seramik yüzeylerde (feldspatik ve IPS Empress e-Max) uygulanan pürüzlendirme teknikleriyle yüzeyde oluşan pürüzlülük ve metal braketlerin bağlanma dayanımları üzerine olan etkisi değerlendirilmesi amaçlandı. Çalışmamıza feldspatik ve IPS e-Max olmak üzere 2 farklı tipte seramik dâhil edildi. Bu amaçla her gruptan 100 adet olmak üzere toplamda 200 örnek disk üretici firmanın talimatlarına göre hazırlandı. Bütün seramik disklerin yüzey pürüzlülüğü profilometre cihazı ile yüzeyler pürüzlendirilmeden önce ve sonra değerlendirildi. Yüzeylere Ti:Safir, Nd:YAG, Er:YAG lazerler ve geleneksel yöntemlerden kumlama ve HF asit uygulandı. Braketler yapıştırıldıktan sonra, termal siklus işlemi uygulanan yüzeyler, makaslama testine tabi tutuldu. Yüzeyde oluşan değişiklikler profilometre, SEM ve AFM analizleri ile incelendi. Istatiksel değerlendirmek için, iki yönlü varyans analizi (ANOVA), Tukey HSD ve Wilcoxon signed rank testleri kullanıldı. Çalışmamızda kullanılan bütün pürüzlendirme teknikleri ile her iki seramik tipi arasında (feldspatik ve IPS Empress e-Max) istatiksel olarak fark bulunmadı (p >0.05). Ti:Safir lazer, hem bağlanma dayanımı, hem de yüzey pürüzlülüğü değerlerinde en yüksek sonuçları gösterdi (p <0.05). SEM ve AFM yüzey analiz yöntemleri de bu bulguları destekledi. İn vitro olarak yapılan çalışmamızın sonuçları Ti:Safir lazerin ortodontide porselen yüzey pürüzlendirmede etkili ve güvenilir bir teknik olduğunu gösterdi.
The aims of the present study were to evaluate the effects of roughening techniques on the shear bond strength of metal brackets and the surface roughness of different ceramic surfaces (feldspathic and IPS Empress e-Max). In total, 200 porcelain discs including 100 from each group were prepared according to the manufacturers' instructions. All ceramic discs was evaluated using a profilometer before and after roughening the surfaces. In each group, the following five subgroups were prepared: femtosecond laser, Nd:YAG laser, Er:YAG laser, sandblasting, and HF acid. After brackets were bonded, the samples were stored in thermocycled. Shear bond strength testing was performed and failure modes were classified. The surface roughness of the ceramic discs was evaluated with SEM and AFM analysis. Data were analyzed using the Wilcoxon signed-rank test (p<0.05), two-way ANOVA, and Tukey's HSD test (p<0.05). No significant difference was found between the feldspathic and IPS Empress e-Max ceramics (p>0.05). The Ti:Sapphire fs laser was associated with the highest mean roughness value and shear bond strength results. SEM and AFM images of the ceramic surfaces treated confirmed that the fs-laser-treated surfaces had the highest degree of irregularity (p< 0.05). Within the limitations of this study, the Ti:Sapphire fs laser yielded the highest surface roughness and could be an alternative ceramic surface treatment to increase bond strength.
The aims of the present study were to evaluate the effects of roughening techniques on the shear bond strength of metal brackets and the surface roughness of different ceramic surfaces (feldspathic and IPS Empress e-Max). In total, 200 porcelain discs including 100 from each group were prepared according to the manufacturers' instructions. All ceramic discs was evaluated using a profilometer before and after roughening the surfaces. In each group, the following five subgroups were prepared: femtosecond laser, Nd:YAG laser, Er:YAG laser, sandblasting, and HF acid. After brackets were bonded, the samples were stored in thermocycled. Shear bond strength testing was performed and failure modes were classified. The surface roughness of the ceramic discs was evaluated with SEM and AFM analysis. Data were analyzed using the Wilcoxon signed-rank test (p<0.05), two-way ANOVA, and Tukey's HSD test (p<0.05). No significant difference was found between the feldspathic and IPS Empress e-Max ceramics (p>0.05). The Ti:Sapphire fs laser was associated with the highest mean roughness value and shear bond strength results. SEM and AFM images of the ceramic surfaces treated confirmed that the fs-laser-treated surfaces had the highest degree of irregularity (p< 0.05). Within the limitations of this study, the Ti:Sapphire fs laser yielded the highest surface roughness and could be an alternative ceramic surface treatment to increase bond strength.
Açıklama
Anahtar Kelimeler
Ortodontik braketler, Orthodontic brackets, Yüzey pürüzlülüğü, Surface roughness, Ortodontik aygıtlar, Orthodontic appliances, Elektron taramalı mikroskopi, Electron scanning microscopy, Dental stres analizi, Dental stress analysis, Lazerler, Lasers, Dental bonding, Dental porselen, Dental porcelain, Dental restorasyon, Dental restoration
Kaynak
WoS Q Değeri
Scopus Q Değeri
Cilt
Sayı
Künye
Erdur, E. A. (2015). Porselen yüzeyine lazer uygulamasının metal braketlerin bağlanma dayanıklılığı üzerine etkisi. Selçuk Üniversitesi, Yayımlanmış doktora tezi, Konya.