Bifilms and hot tearing of Al-Si alloys
Küçük Resim Yok
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Minerals, Metals and Materials Society
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Hot tearing is one of the most interesting defects that can be found during casting of aluminium alloys. The definition of this defects has some uncertainties such as "it does not always appeal-under apparently identical conditions" or "the defect is highly specific to certain alloys". There are several works in the literature on the modelling and analytical approaches. However, the experimental findings have not been satisfactory. In this work, A356, A380 and A413 alloys were cast in two different moulds to investigate the hot tearing tendency with regard to the melt quality. It was found that bifilms had dominant effect over the hot tearing.
Açıklama
Aluminum Committee of the Light Metals Division;Solidification Committee of the Materials Processing and Manufacturing Division of The Minerals, Metals and Materials Society (TMS)
6th International Symposium on Shape Casting - TMS 2016: 145th Annual Meeting and Exhibition -- 14 February 2016 through 18 February 2016 -- 121634
6th International Symposium on Shape Casting - TMS 2016: 145th Annual Meeting and Exhibition -- 14 February 2016 through 18 February 2016 -- 121634
Anahtar Kelimeler
Al-Si alloys, Casting simulation, Hot tearing, Sand and permanent moid casting
Kaynak
TMS Annual Meeting
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
2016-January
