An investigation of base isolation

dc.contributor.authorHabashi, Akbar Sheidaei
dc.date.accessioned2018-09-05T12:26:52Z
dc.date.available2018-09-05T12:26:52Z
dc.date.issued2012
dc.descriptionUrl: http://sujest.selcuk.edu.tr/sumbtd/article/view/200en_US
dc.description.abstractThe effect of weak shear rigidity is important in the analysis of elastomeric bearings used for base isolation of buildings. In particular, the buckling load is low and the P-? effect is significant as compared to standard columns neglecting shear deformations. In this paper, a simple mechanical model accounting for both shear and flexural deformations is proposed to treat the P-? effect of elastomeric isolation bearings. With adequate choice of the model parameters, the simplified model agrees very well with an exact model in both static and dynamic cases. When applied to the experimental results for some natural rubber bearings, the model is found to describe with good accuracy the effects of axial load on the dynamic stiffness, the damping factor and the height reduction of bearings. A brief study of the post-buckling behaviour of elastomeric bearings using the simplified model is also presented.en_US
dc.description.abstractBinaların taban izolasyonunda kullanılan elastomer yatağın analizinde zayıf kayma rijitliğinin etkisi çok önemlidir. Özellikle, burkulma yükü düşük olup P-? etkisi kayma deformasyonlarının ihmal edildiği standart kolonlara nazaran önemlidir. Bu makalede, elastomerik izolasyon yatakların P-? etkisini işlemek için hem kayma hem de eğilme deformasyonlarını nazara alan basit bir mekanik model önerilmiştir. Model parametrelerinin yeterli seçimi ile basitleştirilmiş model hem statik hem de dinamik durumlarda gerçek modelle iyi uyum göstermektedir. Tabii kauçuktan mamul yataklar için deney sonuçları tatbik edildiğinde modelin, eksenel yükün dinamik direngenlik üzerine etkileri, sönümleme faktörü ve taşıyıcı yüksekliğinde azalması üzerine doğru sonuçlar verdiği bulunmuştur. Ayrıca, basitleştirilmiş model kullanılarak elastomerik yatakların ileri-burkulma çalışması da takdim edilmiştir.en_US
dc.identifier.citationHabashi, A. S. (2012). An investigation of base isolation. Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 27, (1), 1-10.en_US
dc.identifier.endpage10
dc.identifier.issn1300?5200en_US
dc.identifier.issn1304-8708en_US
dc.identifier.startpage1
dc.identifier.urihttps://hdl.handle.net/20.500.12395/12319
dc.identifier.volume27
dc.language.isoenen_US
dc.publisherSelçuk Üniversitesi Mühendislik-Mimarlık Fakültesien_US
dc.relation.ispartofSelçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisien_US
dc.relation.publicationcategoryMakale - Kategori Belirleneceken_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectBase isolationen_US
dc.subjectElastomeric bearingen_US
dc.subjectBucklingen_US
dc.subjectPost-bucklingen_US
dc.subjectTaban izolasyonuen_US
dc.subjectElastomer yataken_US
dc.subjectBurkulmaen_US
dc.subjectSonraki burkulmaen_US
dc.titleAn investigation of base isolationen_US
dc.title.alternativeTaban izolasyonu üzerine bir incelemeen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Akbar Sheidaei HABASHI.pdf
Boyut:
443.2 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.51 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: