Elektrospin yöntemiyle termoelektrik nano yapılar üretimi ve karakterizasyonu

dc.contributor.advisorKoyuncu, Mustafa
dc.contributor.authorErdal, Mehmet Okan
dc.date.accessioned2014-12-18T12:02:06Z
dc.date.available2014-12-18T12:02:06Z
dc.date.issued2013-12-04
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Fizik Ana Bilim Dalıen_US
dc.description.abstractBu çalışmada, oksit termoelektrik madde olarak bilinen sodyum kobaltit ( NaxCo2O4 ) ve onun nikel ve bor katkılı türevleri elektro-eğirme metoduyla üretilerek, termoelektrik ve diğer fiziksel özellikleri incelenmiştir. Bu amaçla 5 farklı polimer çözelti hazırlanmış olup bu çözeltilerden 4 tanesi elektro-eğirme yöntemi ile nanolif haline dönüştürülmüştür. Diğer örnek ise polimerik sol-jel metodu ile üretilmiştir. Her iki yöntemle üretilen numuneler kalsinasyon işlemine tabi tutularak toz halinde termoelektrik nanokompozit seramik malzemeler elde edilmiştir. Nanoliflerin kalsinasyon işlemi öncesi ve sonrasındaki morfolojileri taramalı elektron mikroskobu ile incelenmiştir. Numunelerin yapısal analizi XRD ve kızıl ötesi spektroskopisi (FTIR) ile karakterize edilmiştir. Aynı zamanda elektro-eğirme yöntemi ile üretilen numunelerin termal özellikleri, DSC, TGA ve DTA ölçümleri ile belirlenmiştir. Daha sonra, toz halindeki malzemeler soğuk pres yöntemiyle pelet haline getirilmiş ve uygun sıcaklıkta sinterleme işlemine tabi tutulmuştur. Sinterleme sonrası bütün numunelerin termoelektrik özellikleri (Seebeck katsayısı, elektriksel iletkenlik, ısıl iletkenlik, termoelektrik kalite faktörü) 10-300 K sıcaklıkları arasında Lot ? Oriel PPMS sistemi ile ölçülmüştür. Sonuç olarak, üretim yönteminin ve Ni, B ilavesinin sodyum kobaltitin termoelektrik özellikleri üzerindeki etkileri ayrıntılı olarak incelenmiştir.en_US
dc.description.abstractIn this study, the physical and thermal properties of sodium cobaltate (NaxCo2O4), known as the oxide thermoelectric material, and its nickel and boron doped derivatives produced by electrospinning method are investigated. For this purpose, 5 different polymer solutions were prepared. While 4 sample were transformed into nanofiber form by electrospinning technique another example was produced by the method of polymeric sol-gel. All of the samples were performed to calcination process and thermoelectric nanocomposite ceramic materials were obtained in powder form. Nanofibers morphology were examined by scanning electron microscopy before and after the calcination process. Structural analysis of the samples were characterized by XRD apparatus and infrared spectrometry (FTIR). Also the thermal properties of the samples produced by the method of electro-spinning were determined by the DSC, TGA and DTA measurements. Then the pulverulent materials were pelleted with cold press and sintered under proper temperature. The thermoelectric properties (Seebeck coefficient, electrical conductivity, thermal conductivity, figure of merit ) of the samples were measured by Lot - Oriel PPMS system at temperatures between 10-300 K after sintering. As a result, the production method and the effects of Ni, B on the thermoelectric properties of sodium cobaltate were investigated in detail.en_US
dc.identifier.citationErdal, M. O. (2013). Elektrospin yöntemiyle termoelektrik nano yapılar üretimi ve karakterizasyonu. Selçuk Üniversitesi, Yayımlanmış doktora tezi, Konya.en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/1028
dc.language.isotren_US
dc.publisherSelçuk Üniversitesi Fen Bilimleri Enstitüsüen_US
dc.relation.publicationcategoryTezen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectElektro-eğirmeen_US
dc.subjectNano-seramiken_US
dc.subjectOksit termoelektrik materyalleren_US
dc.subjectSodyum kobaltiten_US
dc.subjectSol-jelen_US
dc.subjectTermoelektriken_US
dc.subjectElektrospinnigen_US
dc.subjectNanoceramicen_US
dc.subjectOxide thermoelectric materialsen_US
dc.subjectSodium cobaltateen_US
dc.subjectSolgelen_US
dc.subjectThermoelectricen_US
dc.titleElektrospin yöntemiyle termoelektrik nano yapılar üretimi ve karakterizasyonuen_US
dc.title.alternativeSynthesis and characterization of thermoelectric nano structures by electrospinningen_US
dc.typeDoctoral Thesisen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
Mehmet Okan Erdal.pdf
Boyut:
6.69 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.71 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: