THE EFFECT OF SR MODIFICATION AND HOLDING TIME ON Si MORPHOLOGY AND MECHANICAL PROPERTIES OF ETIAL 195 ALLOY

Basit Öğe Kaydı
dc.contributor.authorUludag, Muhammet
dc.contributor.authorGemi, Lokman
dc.contributor.authorEryilmaz, Muhammed Rasit
dc.contributor.authorDispinar, Derya
dc.date.accessioned2020-03-26T19:07:26Z
dc.date.available2020-03-26T19:07:26Z
dc.date.issued2015
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractHypereutectic Al-Si alloys are typically used in applications where wear resistance is required. The primary factor that determines the wear properties is the morphology of Si in these types of alloys. Pouring temperature is one of the ways to control Si size and shape. On the other hand, bifilm defects that may be present in the liquid can significantly alter the morphology of Si acting as a heterogeneous nucleant. Therefore in this work, castings were made at 800 degrees C with varying holding time and the effects of bifilm on the Si morphology was studied. Bifilm content was measured by Reduced Pressure Test and image analysis was used to characterize Si morphology. In addition, tensile tests were carried out to correlate Si morphology with mechanical properties.en_US
dc.identifier.doi10.5505/pajes.2015.59932en_US
dc.identifier.endpage351en_US
dc.identifier.issn1300-7009en_US
dc.identifier.issn2147-5881en_US
dc.identifier.issue8en_US
dc.identifier.pmid#YOKen_US
dc.identifier.startpage348en_US
dc.identifier.urihttps://dx.doi.org/10.5505/pajes.2015.59932
dc.identifier.urihttps://hdl.handle.net/20.500.12395/32635
dc.identifier.volume21en_US
dc.identifier.wosWOS:000443158600003en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherPAMUKKALE UNIVen_US
dc.relation.ispartofPAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISIen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectETIAL 195en_US
dc.subjectSr modificationen_US
dc.subjectSi morphologyen_US
dc.subjectMechanical propertiesen_US
dc.subjectHolding timeen_US
dc.titleTHE EFFECT OF SR MODIFICATION AND HOLDING TIME ON Si MORPHOLOGY AND MECHANICAL PROPERTIES OF ETIAL 195 ALLOYen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu