Some Physical Properties of White Lupin

Basit Öğe Kaydı
dc.contributor.authorÖğüt, H.
dc.date.accessioned2020-03-26T16:26:19Z
dc.date.available2020-03-26T16:26:19Z
dc.date.issued1998
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe dependence of physical properties of white lupin on moisture content was determined. The average length, width and thickness of grains ranged from 9.85 to 10.52, 9.15 to 9.63 and 4.94 to 5.51 mm as the moisture content increased from 8.3 to 19.2% d.b., respectively. Over the same range, the volume of a grain increased from 0.35 to 0.43 cm(3), 1000 grain mass from 0.351 to 0.452 kg, porosity from 0.115 to 0.304 and projected area from 1.11 to 1.53 cm(2). The bulk density decreased from 868 to 768 kg/m(3) but kernel density increased from 980 to 1103 kg/m(3). Both the static and dynamic coefficients of friction against galvanized steel and rubber increased with increasing moisture content.en_US
dc.identifier.citationÖğüt, H., (1998). Some Physical Properties of White Lupin. Journal of Agricultural Engineering Research, 69(3), 273-277.
dc.identifier.endpage277en_US
dc.identifier.issn0021-8634en_US
dc.identifier.issue3en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage273en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/16793
dc.identifier.volume69en_US
dc.identifier.wosWOS:000073188900011en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÖğüt, H.
dc.language.isoenen_US
dc.publisherACADEMIC PRESS LTDen_US
dc.relation.ispartofJournal of Agricultural Engineering Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.titleSome Physical Properties of White Lupinen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu