An experimental study on strengthening of vulnerable RC frames with RC wing walls
Küçük Resim Yok
Tarih
2012
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
TECHNO-PRESS
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
One of the most popular and commonly used strengthening techniques to protect against earthquakes is to infill the holes in reinforced concrete (RC) frames with fully reinforced concrete infills. In some cases, windows and door openings are left inside infill walls for architectural or functional reasons during the strengthening of reinforced concrete-framed buildings. However, the seismic performance of multistory, multibay, reinforced concrete frames that are strengthened by reinforced concrete wing walls is not well known. The main purpose of this study is to investigate the experimental behavior of vulnerable multistory, multibay, reinforced concrete frames that were strengthened by introducing wing walls under a lateral load. For this purpose, three 2-story, 2-bay, 1/3-scale test specimens were constructed and tested under reversed cyclic lateral loading. The total shear wall (including the column and wing walls) length and the location of the bent beam bars were the main parameters of the experimental study. According to the test results, the addition of wing walls to reinforced concrete frames provided significantly higher ultimate lateral load strength and higher initial stiffness than the bare frames did. While the total shear wall length was increased, the lateral load carrying capacity and stiffiiess increased significantly.
Açıklama
Anahtar Kelimeler
seismic strengthening, reinforced concrete (RC), frame, wing wall, reversed cyclic load
Kaynak
STRUCTURAL ENGINEERING AND MECHANICS
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
41
Sayı
6
