Wear behavior of different surface treated cam spindles

Basit Öğe Kaydı
dc.contributor.authorSert, H.
dc.contributor.authorCan, A.
dc.contributor.authorArikan, H.
dc.contributor.authorSelcuk, B.
dc.contributor.authorToprak, H.
dc.date.accessioned2020-03-26T17:04:46Z
dc.date.available2020-03-26T17:04:46Z
dc.date.issued2006
dc.departmentSelçuk Üniversitesien_US
dc.description4th Balkan Tribology Conference -- JUN, 2002 -- Kayseri, TURKEYen_US
dc.description.abstractIn this study wear behavior of cam spindles made of five different surface treated nodular cast iron (GGG50) and induction hardened CK45 steels was investigated. In the experiments; PVD-TiN-coated, both borided and PVD-TiN-coated, only hardened, both hardened and PVD-TiN-coated and only borided spherical graphite cast iron and induction hardened CK45 were used. The wear behavior of two type of steel was observed using cam wear mechanism under unlubricated and six different surface treatments. AISI 4140 steel was used for abrasive plate. The boronizing process was realized in a salt bath consisting of borax, boric acid and ferro-silicon at 900 degrees C for 6 h and appropriate boronizing heat treatment was carried out under atmospheric pressure. Borides, e.g. FeB, and Fe2B formed on ductile iron was verified by scanning electron microscope (SEM) and the distribution of alloying elements was detected by means of energy dispersive spectroscopy (EDS) from the surface to the interior. The weight loss amounts were determined as a function of sliding time and sliding velocity. In the result of the experiments; boriding and PVD-TiN coating were successfully applied to GGG50 spherical cast iron. These surface treatments increased the wear resistance of GGG50 material. (c) 2005 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.wear.2005.06.012en_US
dc.identifier.endpage1019en_US
dc.identifier.issn0043-1648en_US
dc.identifier.issn1873-2577en_US
dc.identifier.issue09.10.2020en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1013en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.wear.2005.06.012
dc.identifier.urihttps://hdl.handle.net/20.500.12395/20768
dc.identifier.volume260en_US
dc.identifier.wosWOS:000237818600010en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE SAen_US
dc.relation.ispartofWEARen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectboronizingen_US
dc.subjectPVDen_US
dc.subjectTiNen_US
dc.subjectcam spindleen_US
dc.subjectwearen_US
dc.titleWear behavior of different surface treated cam spindlesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu