Recycling studies of marble processing waste: Composites based on commercial epoxy resin

Basit Öğe Kaydı
dc.contributor.authorAhmetli, Gulnare
dc.contributor.authorDag, Mustafa
dc.contributor.authorDeveci, Huseyin
dc.contributor.authorKurbanli, Refika
dc.date.accessioned2020-03-26T18:31:11Z
dc.date.available2020-03-26T18:31:11Z
dc.date.issued2012
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractMarble waste was obtained from marble processing plant wastewater with precipitation using different coagulants, such as sepiolite, zeolite, and pumice in dosages of 0.58 g/500 mL and mixed in 20 wt % with commercial epoxy resin. The effects of marble, coagulant type and dosage on the physicomechanical and thermal properties were investigated. The incorporation of marble processing waste particles increases the 10% decomposition temperature of pure epoxy by 550 degrees C. Surface hardness, tensile strength, percentage elongation, and stress at maximum load of the composites were higher than those of pure resin, too. The composites reinforced with marble processing waste-pumice showed about 10% increase in elastic modulus, whereas the composite reinforced with marble processing waste-sepiolite or zeolite showed about 76.67143.33% increase in elastic modulus over the pure epoxy matrix. Scanning electron microscopy (SEM) was used for characterization of surface and cross sections of the composites to verify the results. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012en_US
dc.description.sponsorshipSelcuk University Scientific Research FoundationSelcuk University [09201099]en_US
dc.description.sponsorshipContract grant sponsor: Selcuk University Scientific Research Foundation; contract grant number: 09201099.en_US
dc.identifier.doi10.1002/app.34548en_US
dc.identifier.endpage30en_US
dc.identifier.issn0021-8995en_US
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage24en_US
dc.identifier.urihttps://dx.doi.org/10.1002/app.34548
dc.identifier.urihttps://hdl.handle.net/20.500.12395/28358
dc.identifier.volume125en_US
dc.identifier.wosWOS:000302349700004en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWILEY-BLACKWELLen_US
dc.relation.ispartofJOURNAL OF APPLIED POLYMER SCIENCEen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectwasteen_US
dc.subjectcompositesen_US
dc.subjectmechanical propertiesen_US
dc.subjectthermal propertiesen_US
dc.titleRecycling studies of marble processing waste: Composites based on commercial epoxy resinen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
28358.pdf
Boyut:
1.02 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu