Optimum Cutting Speed of Block-Cutting Machines in Natural Stones for Energy Saving

Basit Öğe Kaydı
dc.contributor.authorBilim, N.
dc.date.accessioned2020-03-26T18:30:58Z
dc.date.available2020-03-26T18:30:58Z
dc.date.issued2012
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractEnergy consumption of block-cutting machines represents a major cost item in the processing of travertines and other natural stones. Therefore, determining the optimum sawing conditions for a particular stone is of major importance in the natural stone-processing industry. An experimental study was carried out utilizing a fully instrumented block-cutter to investigate the sawing performances of five different types of travertine blocks during cutting with a circular diamond saw. The sawing tests were performed in the down-cutting mode. Performance measurements were determined by measuring the cutting speed and energy consumption. Then, specific energy was determined. The one main cutting parameter, cutting speed, was varied in the investigation of optimum cutting performance. Furthermore, some physico-mechanical properties of the travertine blocks were determined in the laboratory. As a result, it is found that the energy consumption (specific energy) of block cutting machines is highly affected by cutting speed. It is determined that specific energy value usually decreases when cutting speed increases. When the cutting speed is higher than the determined value, the diamond saw can become stuck in the travertine block; this situation can be a problem for the block-cutting machine. As a result, the optimum cutting speed obtained for the travertine mines examined is approximately 1.5-2.0 m/min.en_US
dc.identifier.citationBilim, N., (2012). Optimum Cutting Speed of Block-Cutting Machines in Natural Stones for Energy Saving. Journal of Central South University, 19(5), 1234-1239. DOI: 10.1007/s11771-012-1134-y
dc.identifier.doi10.1007/s11771-012-1134-yen_US
dc.identifier.endpage1239en_US
dc.identifier.issn2095-2899en_US
dc.identifier.issn2227-5223en_US
dc.identifier.issue5en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1234en_US
dc.identifier.urihttps://dx.doi.org/10.1007/s11771-012-1134-y
dc.identifier.urihttps://hdl.handle.net/20.500.12395/28276
dc.identifier.volume19en_US
dc.identifier.wosWOS:000303479700011en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorBilim, N.
dc.language.isoenen_US
dc.publisherJOURNAL OF CENTRAL SOUTH UNIVen_US
dc.relation.ispartofJournal of Central South Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectcutting speeden_US
dc.subjecttravertineen_US
dc.subjectblock cutting machineen_US
dc.subjectspecific energyen_US
dc.subjectnatural stoneen_US
dc.subjectenergy savingen_US
dc.titleOptimum Cutting Speed of Block-Cutting Machines in Natural Stones for Energy Savingen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
Ä°sim:
28276.pdf
Boyut:
505.75 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
Ä°ndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Maden Mühendisliği Bölümü/Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu