An experimental investigation as to the effect of cutting parameters on roundness error and surface roughness in cylindrical grinding

Basit Öğe Kaydı
dc.contributor.authorSaglam, H
dc.contributor.authorUnsacar, F
dc.contributor.authorYaldiz, S
dc.date.accessioned2020-03-26T16:56:32Z
dc.date.available2020-03-26T16:56:32Z
dc.date.issued2005
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThis paper presents the results of an experimental investigation as to the effects of grinding parameters on roundness error and surface roughness in cylindrical grinding. Many variables including the wheel materials, wheel loading and dressing, workpiece metallurgy, work drive mechanisms, work holding methods, coolant types, feeds and speeds, machine stiffness and age, surface conditions, centre conditions, floor vibrations all influence the quality of ground parts. However, the composite sum of these grinding parameters creates static and dynamic forces. It is obvious that the roundness error and surface roughness are created by many parameters, but in this study, only the effects of the depth of cut, work speed and feed rate which create the grinding forces in cylindrical grinding are investigated. The grinding experiments were planned according to the principles of orthogonal arrays (OAs), developed by Taguchi, and were performed so as to understand the effects of these parameters on roundness error and surface roughness. The experimental data was analysed by using statistical tools: the percent contribution from an analysis of variance ( ANOVA) and the correlation between machining parameters with roundness error ( R) and also surface roughness (Ra). Roundness was found to be the most related with the cutting speed, grinding force and depth of cut, while surface roughness is related to feed rate and work speed.en_US
dc.identifier.doi10.1080/00207540412331330110en_US
dc.identifier.endpage2322en_US
dc.identifier.issn0020-7543en_US
dc.identifier.issue11en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage2309en_US
dc.identifier.urihttps://dx.doi.org/10.1080/00207540412331330110
dc.identifier.urihttps://hdl.handle.net/20.500.12395/19591
dc.identifier.volume43en_US
dc.identifier.wosWOS:000228883000009en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTAYLOR & FRANCIS LTDen_US
dc.relation.ispartofINTERNATIONAL JOURNAL OF PRODUCTION RESEARCHen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectroundness erroren_US
dc.subjectcylindrical grindingen_US
dc.subjectaffected grinding parametersen_US
dc.subjectgrinding forceen_US
dc.subjectsurface roughnessen_US
dc.subjectorthogonal designen_US
dc.titleAn experimental investigation as to the effect of cutting parameters on roundness error and surface roughness in cylindrical grindingen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
makale225.pdf
Boyut:
198.97 KB
Biçim:
Adobe Portable Document Format
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu