Investigation the glazability of dimension andesites with glaze coating materials containing boron minerals in construction sector

Basit Öğe Kaydı
dc.contributor.authorSariisik, G.
dc.contributor.authorSariisik, A.
dc.contributor.authorGokay, M. K.
dc.date.accessioned2020-03-26T18:42:17Z
dc.date.available2020-03-26T18:42:17Z
dc.date.issued2013
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThis study examined the usability of thin plates cut from rocks of volcanic origin as new decorative indoor and outdoor coating material when used instead of ceramic saddle. The study examined the basic material characterization of andesites and the glazability of andesites with glaze coating materials containing boron minerals. The series of characterization tests were conducted on andesite samples. Then, the samples were applied glaze for trial purposes. Analysis indicated that the andesite samples consisted of sanidine, mica and pyroxene minerals and its apparent porosity, density, water absorption, salt crystallization resistance, compressive strength, frost after compressive strength, bending strength and impact resistance values were 15.75 %, 2,640 kg/m(3), 7.41 %, 1.06 %, 47.03 MPa, 45.25 MPa, 10.16 MPa and 9.87 kPa respectively. In heat microscope measurements, maximum sintering was recorded at 1,182 A degrees C. Linear expansion coefficient (alpha) of the andesite at 400 A degrees C was 4.69 x 10(-6) K-1. Firing performed by using the prepared glaze recipe at approximately 1,055 and 1,000 A degrees C produced good results in terms of body-glaze harmony.en_US
dc.description.sponsorshipTUBITAKTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [108M027]en_US
dc.description.sponsorshipThis study was financially supported by the TUBITAK-1001 Project (Project No: 108M027). We would like to thank TUBITAK for its valuable contributions.en_US
dc.identifier.doi10.1617/s11527-012-9992-1en_US
dc.identifier.endpage1517en_US
dc.identifier.issn1359-5997en_US
dc.identifier.issn1871-6873en_US
dc.identifier.issue9en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1507en_US
dc.identifier.urihttps://dx.doi.org/10.1617/s11527-012-9992-1
dc.identifier.urihttps://hdl.handle.net/20.500.12395/29594
dc.identifier.volume46en_US
dc.identifier.wosWOS:000323252500009en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSPRINGERen_US
dc.relation.ispartofMATERIALS AND STRUCTURESen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectAndesitesen_US
dc.subjectGlazeen_US
dc.subjectCoatingen_US
dc.subjectBoron mineralsen_US
dc.subjectNew productsen_US
dc.subjectConstruction sectoren_US
dc.titleInvestigation the glazability of dimension andesites with glaze coating materials containing boron minerals in construction sectoren_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu