Damage behavior of filament winding pipes modified with carbon nanotubes under internal pressure
Yükleniyor...
Dosyalar
Tarih
2015
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
GAZI UNIV
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, damage behavior of filament winded glass-reinforced plastic (GRP) pipes that reinforcing material mixed in different proportions of under static internal pressure was examined. Multi-walled carbon nanotubes (MWCNT) are used as reinforcing material and the medium-viscosity epoxy are used as matrix material. Free-ended internal pressure test was applied to the experiment. Test specimens were produced with six layered and +/- 55 degrees winding angle. Reinforcement material was added as 0,5% and 1%. In addition, the wall thickness ratio of surface cracks on each kind of sample (w / t) was opened as 0.25 and 0.5 measure. Pure epoxy GRP pipes with same physical characteristics have been used as comparison sample. According to the geometry of the notch surface and different reinforcement ratios burst pressure values were determined and investigated.
Açıklama
Anahtar Kelimeler
Carbon nanotube (CNT), epoxy, nanocomposite, internal pressure test, Carbon nanotube (CNT), Epoxy, Nanocomposite, Internal pressure test
Kaynak
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
18
Sayı
4
Künye
Taşyürek, M., Tarakçıoğlu, N. (2015). Damage Behavior of Filament Winding Pipes Modified with Carbon Nanotubes Under Internal Pressure. Journal of Polytechnic-Politeknik Dergisi, 18(4), 211-217.
