Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron

Basit Öğe Kaydı
dc.contributor.authorAvci, Ahmet
dc.contributor.authorIlkaya, Nevzat
dc.contributor.authorSimsir, Mehmet
dc.contributor.authorAkdemir, Ahmet
dc.date.accessioned2020-03-26T17:39:12Z
dc.date.available2020-03-26T17:39:12Z
dc.date.issued2009
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn the present experimental study, strengthening of gray cast iron by reinforcing with steel plates was investigated in the as-cast and normalized conditions. Normalizing heat treatments were applied to the specimens at temperatures of 800 degrees C and 850 degrees C. Three-point bend specimens were manufactured from gray cast iron and also from gray cast iron with reinforced steel plates. Flexural strengths of the steel-plate-reinforced cast iron were calculated for four distinct volume fractions (V-r = 0.04, 0.08, 0.12, and 0.16). The current study shows that the steel-plate-rein forced gray cast iron has higher flexural strength and flexural modulus than the cast iron without reinforcement. The flexural strength considerably increases with slight increase in normalization temperature. Optical and scanning electron microscopy analyses were used to examine flake morphology and microstructures of gray cast iron and steel-plate-reinforced gray cast iron. it is noted that carbon diffuses from the gray cast iron to the steel plates. A transition region containing partially dissolved graphite and having high hardness was observed due to the carbon diffusion. (C) 2008 Elsevier B.V. All rights reserveden_US
dc.identifier.doi10.1016/j.jmatprotec.2008.03.052en_US
dc.identifier.endpage1416en_US
dc.identifier.issn0924-0136en_US
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1410en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.jmatprotec.2008.03.052
dc.identifier.urihttps://hdl.handle.net/20.500.12395/23668
dc.identifier.volume209en_US
dc.identifier.wosWOS:000263394000032en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE SAen_US
dc.relation.ispartofJOURNAL OF MATERIALS PROCESSING TECHNOLOGYen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectMetal matrix compositesen_US
dc.subjectMechanical propertiesen_US
dc.subjectCastingen_US
dc.subjectMicrostructureen_US
dc.subjectOptical microscopy analysesen_US
dc.titleMechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast ironen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu