Investigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritor

Basit Öğe Kaydı
dc.contributor.authorKilinc, Y
dc.contributor.authorOzturk, S
dc.contributor.authorOzturk, B
dc.contributor.authorUslan, I
dc.date.accessioned2020-03-26T16:55:20Z
dc.date.available2020-03-26T16:55:20Z
dc.date.issued2004
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, a vibratory horizontal attritor was designed, constructed and used to produce alumina powders. The effects of process parameters, such as milling time, ball-powder weight ratio (BPR) and rotational speed (RS) of the attritor on the mean particle size and particle size distribution have been investigated. Milling times of 1, 5, 10 and 15 It and ball-powder weight ratios of 5:1, 10:1, 20:1 and 40:1 were considered in the present study. Rotational speeds of the attritor were selected as 500, 700 and 900 rpm and distilled water was used as milling media. The experimental results show that increasing milling time and ball-powder weight ratio resulted in finer particles. Optimum rotational speed of the attritor was found as 700 rpm. The mean particle size of attrited powders were in the range of 2.05-6.82 mum, depending on process parameters. (C) 2004 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.powtec.2004.09.031en_US
dc.identifier.endpage205en_US
dc.identifier.issn0032-5910en_US
dc.identifier.issn1873-328Xen_US
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage200en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.powtec.2004.09.031
dc.identifier.urihttps://hdl.handle.net/20.500.12395/19107
dc.identifier.volume146en_US
dc.identifier.wosWOS:000225173700005en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE BVen_US
dc.relation.ispartofPOWDER TECHNOLOGYen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectalumina powdersen_US
dc.subjectattritoren_US
dc.subjectball millingen_US
dc.titleInvestigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritoren_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
10.1016@j.powtec.2004.09.031.pdf
Boyut:
1.39 MB
Biçim:
Adobe Portable Document Format
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu