An investigation of manufacturing of assembled part by using chromium interface in powder injection molding process

Basit Öğe Kaydı
dc.contributor.authorYilmaz, Oguz
dc.contributor.authorSamet, Kamran
dc.contributor.authorKocak, Harun
dc.contributor.authorKaratas, Cetin
dc.date.accessioned2020-03-26T20:12:30Z
dc.date.available2020-03-26T20:12:30Z
dc.date.issued2019
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, assembled parts with spherical shaped and movable interface production were investigated by powder injection molding method using a new method. In this method, the movement of the mechanism was provided by the coated chrome interface between the components. The interior and outer part of the mechanism was produced of Ck45 steel (insert) and WC-%9Co feedstock, respectively. The interface was formed with chrome plated onto Ck45 steel. The coated Ck45 steel was placed into mold and then WC-%9Co feedstock is injected onto insert. The chemical debinding and sintering processes were applied to specimens after injection. As a result of preventing to diffusion of chrome interface at the sintering stage, the desired clearance between the components was obtained and ensured the movement of assembled part. Control of the clearance between the components was provided by the interface thickness and sintering temperature parameters. The effect of the clearance on these parameters was investigated by mathematical calculations, virtual analyzes and these results were compared with the experimental results. For the sintering temperatures of 1100, 1200 and 1300 degrees C the clearances were obtained as 50, 40 and 30 mu m, respectively. It was observed that the thickness of the interface does not affect the clearance of ball joint.en_US
dc.identifier.doi10.17341/gazimmfd.416519en_US
dc.identifier.endpage634en_US
dc.identifier.issn1300-1884en_US
dc.identifier.issn1304-4915en_US
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage622en_US
dc.identifier.urihttps://dx.doi.org/10.17341/gazimmfd.416519
dc.identifier.urihttps://hdl.handle.net/20.500.12395/37473
dc.identifier.volume34en_US
dc.identifier.wosWOS:000468368400004en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.publisherGAZI UNIV, FAC ENGINEERING ARCHITECTUREen_US
dc.relation.ispartofJOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITYen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectPowder injection moldingen_US
dc.subjectchrome coatingen_US
dc.subjectmicro-cleranceen_US
dc.subjectsinteringen_US
dc.subjectassembled parten_US
dc.titleAn investigation of manufacturing of assembled part by using chromium interface in powder injection molding processen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu