Investigation of mechanical, thermal and surface properties of nanoclay/HDPE nanocomposites produced industrially by melt mixing approach

Basit Öğe Kaydı
dc.contributor.authorSepet, Harun
dc.contributor.authorTarakcioglu, Necmetin
dc.contributor.authorMisra, R. D. K.
dc.date.accessioned2020-03-26T19:24:50Z
dc.date.available2020-03-26T19:24:50Z
dc.date.issued2016
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe main aim of this paper is to introduce mechanical, thermal and surface properties of produced industrially HDPE-based nanocomposites. For this purpose, 1.0, 2.0, 3.0, 4.0 and 5.0wt.% loading of nanoclay-reinforced HDPE nanocomposites made from the HDPE matrix were prepared by the melt mixing method using a compounder system, which consist of industrial banbury mixer, single screw extruder and granule cutting. The effect of nanoclay on mechanical, thermal and surface properties of nanoclay/HDPE nanocomposites was investigated. The tensile and flexural strength of nanoclay/HDPE nanocomposite increased by about 5% and 7%, respectively, with addition of 1.0wt.% nanoclay. But then it decreased slightly as the nanoclay content increased to 5.0wt.%. The tensile modulus and tensile elongation were decreased with the addition of 1.0wt.% nanoclay, but did not increase further as more nanoclay was added. The flexural modulus of HDPE was significantly improved after (from 1.0wt.% up to 5.0wt.%) addition of nanoclay. It was found that the scratch resistance of nanoclay/HDPE nanocomposite improved with addition of the nanoclay by SEM examination. Density, melting flow index (MFI), differential scanning colorimetry (DSC), and vicat softening temperature (VICAT) were used to characterize the physical and thermal properties of the nanocomposites. The X-ray diffraction (XRD), the Fourier transform infrared spectrophotometry (FTIR), and the scanning electron microscopy (SEM) were used to analyze the structural characteristics of the nanocomposites. It is concluded that the addition of the nanoclay in HDPE has significantly influenced the mechanical, thermal, and surface properties of the nanocomposites.en_US
dc.description.sponsorshipSelcuk University Scientific Research ProjectsSelcuk University [1310102]; Selcuk UniversitySelcuk Universityen_US
dc.description.sponsorshipThe author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Selcuk University Scientific Research Projects [grant number 1310102]. The authors are grateful to Selcuk University for their financial support and the provision of laboratory facilities.en_US
dc.identifier.doi10.1177/0021998315615653en_US
dc.identifier.endpage3116en_US
dc.identifier.issn0021-9983en_US
dc.identifier.issn1530-793Xen_US
dc.identifier.issue22en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage3105en_US
dc.identifier.urihttps://dx.doi.org/10.1177/0021998315615653
dc.identifier.urihttps://hdl.handle.net/20.500.12395/33735
dc.identifier.volume50en_US
dc.identifier.wosWOS:000382566600007en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSAGE PUBLICATIONS LTDen_US
dc.relation.ispartofJOURNAL OF COMPOSITE MATERIALSen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectNanoclayen_US
dc.subjecttensile propertiesen_US
dc.subjectHDPEen_US
dc.subjectnanocompositeen_US
dc.subjectflexural propertiesen_US
dc.subjectmelt mixing methoden_US
dc.subjectindustrial-scaleen_US
dc.subjectthermal propertiesen_US
dc.subjectscratch testen_US
dc.titleInvestigation of mechanical, thermal and surface properties of nanoclay/HDPE nanocomposites produced industrially by melt mixing approachen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu