Effect of Shot Peening on Fatigue Life of the 2024-T4 Aluminum Alloy
Küçük Resim Yok
Tarih
1993
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Aluminum alloy 2024-T4 shot peening was tested for surface treatment effects on fatigue strength. The specimens were machined from rod stock on a lathe and held at 415°C for three hours then solid solution treated at 500°C for 30 minutes. The specimens were rotation bending fatigued and then shot peened with different diameters of shot and at different intensities. Surface roughness increased with shot peening. Peening with glass after peening with steel improved the surface quality. Increasing peening intensity increases surface roughness. 0.28 mm shot diameter at 50 psi, 16-18A +200% peening condition was found as the optimum.
Açıklama
Anahtar Kelimeler
Kaynak
Modelling, Measurement and Control C
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
39
Sayı
4
Künye
Çetin, R., Varol, R., (1993). Effect of Shot Peening on Fatigue Life of the 2024-T4 Aluminum Alloy. Modelling, Measurement and Control C, 39(4), 59-63.
