Effect of Shot Peening on Fatigue Life of the 2024-T4 Aluminum Alloy

Basit Öğe Kaydı
dc.contributor.authorÇetin, Remzi
dc.contributor.authorVarol, Remzi
dc.date.accessioned2020-03-26T16:24:20Z
dc.date.available2020-03-26T16:24:20Z
dc.date.issued1993
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractAluminum alloy 2024-T4 shot peening was tested for surface treatment effects on fatigue strength. The specimens were machined from rod stock on a lathe and held at 415°C for three hours then solid solution treated at 500°C for 30 minutes. The specimens were rotation bending fatigued and then shot peened with different diameters of shot and at different intensities. Surface roughness increased with shot peening. Peening with glass after peening with steel improved the surface quality. Increasing peening intensity increases surface roughness. 0.28 mm shot diameter at 50 psi, 16-18A +200% peening condition was found as the optimum.en_US
dc.identifier.citationÇetin, R., Varol, R., (1993). Effect of Shot Peening on Fatigue Life of the 2024-T4 Aluminum Alloy. Modelling, Measurement and Control C, 39(4), 59-63.
dc.identifier.endpage63en_US
dc.identifier.issn0761-2524en_US
dc.identifier.issue4en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage59en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/16183
dc.identifier.volume39en_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÇetin, Remzi
dc.institutionauthorVarol, Remzi
dc.language.isoenen_US
dc.relation.ispartofModelling, Measurement and Control Cen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.titleEffect of Shot Peening on Fatigue Life of the 2024-T4 Aluminum Alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu