Production of Epoxy Composite from the Pyrolysis Char of Washed PET Wastes

Basit Öğe Kaydı
dc.contributor.authorSogancioglu, Merve
dc.contributor.authorYucel, Alize
dc.contributor.authorYel, Esra
dc.contributor.authorAhmetli, Gulnare
dc.date.accessioned2020-03-26T19:42:23Z
dc.date.available2020-03-26T19:42:23Z
dc.date.issued2017
dc.departmentSelçuk Üniversitesien_US
dc.description2nd International Conference on Advances on Clean Energy Research (ICACER) -- APR 07-09, 2017 -- Berlin, GERMANYen_US
dc.description.abstractPyrolysis of washed poly (ethylene terephthalate) (PET) plastic wastes was performed, pyrolysis products yields were determined and epoxy composite was prepared with char additive in this study. The pyrolysis runs were carried out in the temperature range of 300-700 degrees C in order to indicate the effects of pyrolysis temperature on products. The char from pyrolysis was used in the production of epoxy composite material and char replaced at 10 to 50 wt% of the epoxy resin. Mechanical properties, namely tensile strength, surface hardness and electrical properties were determined for the epoxy composite materials. The tensile strength increased 131% at the dose of 50% for char obtained at 300 degrees C. The hardness was improved up to 83-89 shore D from 80 shore D by the PET char additive in the composite. Epoxy composite material obtained by PET pyrolysis char additive obtained at 300 degrees C showed the better behavior in terms of elongation at break and tensile strength. (C) 2017 The Authors. Published by Elsevier Ltden_US
dc.description.sponsorshipTUBITAKTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [114Y116]; Selcuk UniversitySelcuk University [15201091]en_US
dc.description.sponsorshipThis study is financially supported by TUBITAK under grant no 114Y116 and Selcuk University under grant no 15201091.en_US
dc.identifier.doi10.1016/j.egypro.2017.07.022en_US
dc.identifier.endpage220en_US
dc.identifier.issn1876-6102en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage216en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.egypro.2017.07.022
dc.identifier.urihttps://hdl.handle.net/20.500.12395/35405
dc.identifier.volume118en_US
dc.identifier.wosWOS:000419168400030en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE BVen_US
dc.relation.ispartof2017 2ND INTERNATIONAL CONFERENCE ON ADVANCES ON CLEAN ENERGY RESEARCH (ICACER 2017)en_US
dc.relation.ispartofseriesEnergy Procedia
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectcharen_US
dc.subjectcompositeen_US
dc.subjectpyrolysisen_US
dc.subjectPETen_US
dc.titleProduction of Epoxy Composite from the Pyrolysis Char of Washed PET Wastesen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu