An Experimental Investigation of Performance and Exergy Analysis of a Counterflow Vortex Tube Having Various Nozzle Numbers at Different Inlet Pressures of Air, Oxygen, Nitrogen, and Argon

Yükleniyor...
Küçük Resim

Tarih

2010

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Asme-Amer Soc Mechanical Eng

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

An experimental investigation has been carried out to determine the thermal behavior of cooling fluid as it passes through a vortex tube and the effects of the orifice nozzle number and the inlet pressure on the heating and cooling performance of the counterfiow type vortex tube (RHVT). Experiments have been performed using oxygen (O(2)), nitrogen (N(2)), and argon (Ar). Five orifices have been fabricated and used during the experimental study with different nozzle numbers of 2, 3, 4, 5, and 6. The orifices used at these experiments are made of the polyamide plastic material. The thermal conductivity of polyamide plastic material is 0.25 W/m K. To determine the energy separation, the inlet pressure values were adjusted from 150 kPa to 700 kPa with 50 kPa increments for each one of the orifices and each one of the studied fluids. The vortex tube that was used during the experiments has L/D ratio of 15 and the cold mass fraction was held constant at 0.5. As a result of the experimental study, it is determined that the temperature gradient between the cold and hot exits is decreased depending on the orifice nozzle number increase. Exergy analyses have been realized for each one of the studied fluids under the same inlet pressures with the experiments (P(i) = 150-700). The exergy efficiency of the vortex tube is more affected by inlet pressure than nozzle number.

Açıklama

Anahtar Kelimeler

Vortex tube (rhtv), Exergy, Cooling, Heating

Kaynak

Journal of Heat Transfer-Transactions of the Asme

WoS Q Değeri

Q2

Scopus Q Değeri

Q2

Cilt

132

Sayı

12

Künye

Kırmacı, V., Uluer, O., Dinçer, K., (2010). An Experimental Investigation of Performance and Exergy Analysis of a Counterflow Vortex Tube Having Various Nozzle Numbers at Different Inlet Pressures of Air, Oxygen, Nitrogen, and Argon. Journal of Heat Transfer-Transactions of the Asme, 132(12), 121701-1- 121701-7. Doi: 10.1115/1.4002284