Production and mechanical characterization of prismatic shape machine element by recycling of bronze and cast-iron chips

Basit Öğe Kaydı
dc.contributor.authorAslan, Abdullah
dc.contributor.authorSalur, Emin
dc.contributor.authorGunes, Aydin
dc.contributor.authorSahin, Omer Sinan
dc.contributor.authorKaradag, Hakan Burak
dc.contributor.authorAkdemir, Ahmet
dc.date.accessioned2020-03-26T19:55:20Z
dc.date.available2020-03-26T19:55:20Z
dc.date.issued2018
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, the production and mechanical properties of porous metal matrix composites (MMC's) by recycling of spheroid cast iron chips (GGG-40) and bronze chips (CuSn10) by hot isostatic pressing was investigated. The metal matrix composites were produced with four different CuSn10 contents, three different pressures and temperatures and effects of production parameters on porosity, hardness, flexure properties were examined. Samples were produced in prismatic shape with specified porosity. The mechanical properties were determined by Brinell and Micro Vickers hardness tests and three-point bending test. The consolidation mechanism of metallic chips was also investigated with optic microscopy. It was examined whether any second phase occurred between metallic chips by the help of XRD test. As a result of porosity test, it is found that metal matrix composites can have porosity value of as much as 20%. It is also showed that owing to excessive plastic deformation of Cu Sn10, the hardness of MMC material can be higher than bulk CuSn10. Three-point bending test showed that the flexure properties of MMC materials are is lower than that of bulk CuSn10. As a consequence, it showed that metallic chips were recycled with hot pressing successfully.en_US
dc.description.sponsorshipTubitak (The scientific and technological research council of Turkey)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [113M141]; Selcuk UniversitySelcuk University [BAP-10201039]en_US
dc.description.sponsorshipThis work has been funded by Tubitak (The scientific and technological research council of Turkey) under grant number 113M141 and Selcuk University under grant number BAP-10201039.en_US
dc.identifier.doi10.17341/gazimmfd.416402en_US
dc.identifier.endpage1027en_US
dc.identifier.issn1300-1884en_US
dc.identifier.issn1304-4915en_US
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1013en_US
dc.identifier.urihttps://dx.doi.org/10.17341/gazimmfd.416402
dc.identifier.urihttps://hdl.handle.net/20.500.12395/36892
dc.identifier.volume33en_US
dc.identifier.wosWOS:000444464000018en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.publisherGAZI UNIV, FAC ENGINEERING ARCHITECTUREen_US
dc.relation.ispartofJOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITYen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectMetal chipsen_US
dc.subjectisostatic hot pressingen_US
dc.subjectmetal matrix compositeen_US
dc.subjectrecyclingen_US
dc.subjectmechanical characterizationen_US
dc.titleProduction and mechanical characterization of prismatic shape machine element by recycling of bronze and cast-iron chipsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu