COMPUTER AIDED CONTROL OF CUTTING ERROR IN TEXTILE PRODUCTS

Basit Öğe Kaydı
dc.contributor.authorCevik, Kerim Kursat
dc.contributor.authorKocer, Hasan Erdinc
dc.date.accessioned2020-03-26T19:34:34Z
dc.date.available2020-03-26T19:34:34Z
dc.date.issued2017
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractAt present, the audits about the cutting error of textile products (leather, fabric, etc.) are made by the human by the eye via the template. Making these audits that necessitate accurate measurement by eye both takes so much time and enhance the risk occurrence risk. In this article, the image processing based industrial quality control system that determines the cutting errors of textile products automatically and discriminates between faulty and faultless products is explained. The system minimizes the faults based upon the human auditing and increases the number of pieces that are controlled by the unit of time. The performed system is composed of Panel PC, line scan camera, system of conveyor, basket control unit, image processing software and control user interface. The textile pieces (cuts) to be inspected come into the part by the conveyor where the camera and illumination unit are available, and the image is captured. This captured image is sent to the Panel PC and controlled whether there is a cutting error via image processing software. According to the result of the audit, the basket system at the end of the conveyor (conveyor belt) moves back and forth on wheel rail, and the textile pieces are provided to fall into the required basket. The performed system was tested on the leather pieces that were taken from a company in the leather sector. Totally it was tried by 150 times for 50 pieces of leather in 5 different templates and these pieces felt into the required basket correctly by discriminating for faulty/faultiness ones by 149 times (99,33% success ratio).en_US
dc.description.sponsorshipTurkish Republic Ministry of Science, Industry, and TechnologyMinistry of Science, Industry & Technology - Turkeyen_US
dc.description.sponsorshipThis study is supported by the frame of the Techno-initiative capital support program by Turkish Republic Ministry of Science, Industry, and Technology.en_US
dc.identifier.endpage308en_US
dc.identifier.issn1300-3356en_US
dc.identifier.issue3en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage300en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/34918
dc.identifier.volume27en_US
dc.identifier.wosWOS:000419066000012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEGE UNIVen_US
dc.relation.ispartofTEKSTIL VE KONFEKSIYONen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectTextile cutting errorsen_US
dc.subjectTextile quality controlen_US
dc.subjectImage processingen_US
dc.titleCOMPUTER AIDED CONTROL OF CUTTING ERROR IN TEXTILE PRODUCTSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu