Boron Removal by Electrodialysis With Anion-Exchange Membranes
Yükleniyor...
Dosyalar
Tarih
2006
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Bv
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The removal of boron from an aqueous solution was studied in a two-chamber cell separated with a commercial anion-exchange membrane as a function of current density, pH, type of the membrane, concentration and different type of salt solutions. At the end of these studies, the maximum value of boron removal was obtained under the conditions where the maximum current was applied; 0.1 M H3BO3 (pH = 9) and 0.001 M NaCl solutions were used as a catholyte and an anolyte solution, respectively. The AHA membrane was used for separating the two cells used in the electrodialysis experiments. All experiments were carried out at room temperature, and the concentration of boron at the anode cell was determined by ICP-AES. It was concluded that electrodialysis is an appropriate method for boron removal from aqueous solutions under suitable conditions.
Açıklama
Anahtar Kelimeler
electrodialysis, boron removal, anion-exchange membrane (AEM)
Kaynak
Desalination
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
190
Sayı
Künye
Yazıcıgil, Z., Öztekin, Y., (2006). Boron Removal by Electrodialysis With Anion-Exchange Membranes. Desalination, (190), 71-78. Doi: 10.1016/j.desal.2005.07.016
