OPTIMIZATION OF PROCESS PARAMETERS IN DRILLING OF SMC COMPOSITES USING TAGUCHI METHOD

Basit Öğe Kaydı
dc.contributor.authorCan, Ahmet
dc.contributor.authorUnuvar, Ali
dc.date.accessioned2020-03-26T19:42:14Z
dc.date.available2020-03-26T19:42:14Z
dc.date.issued2017
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThis paper has presented and discussed machinability in the drilling of SMC ( Sheet Mould Compound) A-Class composite materials using Taguchi's DoE method. The thrust forces, surface roughness and push-out - peel-up delamination behaviour in drilling process for glass fibre reinforced SMC composites have been evaluated. The experimental results and the contribution ratio of parameters on machinability outputs have been statistically analysed by ANOVA. Analysis of variance shows that drill bit angle is the prominent parameter followed by feed rate and cutting speed that contributes towards output responses. Confirmation experiments performed with the optimum parameter condition levels show a reduction in thrust force by 9,8 %, surface roughness by 33,3 %, push-out delamination by 2,5 % and peel-up delamination by 1,38 %. A detailed deformation analysis was investigated for SMC composites. For the empirical modelling of machinability, outputs of SMC composites can be modelled with the quadratic polynomial regression model in a higher range of accuracy.en_US
dc.description.sponsorshipNecmettin Erbakan UniversityNecmettin Erbakan University; Selcuk University Scientific Research Projects (BAP) Coordinators hipsen_US
dc.description.sponsorshipThis work was supported by Necmettin Erbakan University and Selcuk University Scientific Research Projects (BAP) Coordinators hips.en_US
dc.identifier.doi10.17559/TV-20160103215256en_US
dc.identifier.endpage442en_US
dc.identifier.issn1330-3651en_US
dc.identifier.issn1848-6339en_US
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage435en_US
dc.identifier.urihttps://dx.doi.org/10.17559/TV-20160103215256
dc.identifier.urihttps://hdl.handle.net/20.500.12395/35351
dc.identifier.volume24en_US
dc.identifier.wosWOS:000399563100015en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUNIV OSIJEK, TECH FACen_US
dc.relation.ispartofTEHNICKI VJESNIK-TECHNICAL GAZETTEen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectSMC (Sheet Mould Compound)en_US
dc.subjectdrillingen_US
dc.subjectdelaminationen_US
dc.subjectTaguchien_US
dc.subjectANOVAen_US
dc.titleOPTIMIZATION OF PROCESS PARAMETERS IN DRILLING OF SMC COMPOSITES USING TAGUCHI METHODen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu