Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method

Basit Öğe Kaydı
dc.contributor.authorAsıltürk, İlhan
dc.contributor.authorAkkuş, Harun
dc.date.accessioned2020-03-26T18:14:08Z
dc.date.available2020-03-26T18:14:08Z
dc.date.issued2011
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThis study focuses on optimizing turning parameters based on the Taguchi method to minimize surface roughness (Ra and Rz). Experiments have been conducted using the L9 orthogonal array in a CNC turning machine. Dry turning tests are carried out on hardened AISI 4140 (51 HRC) with coated carbide cutting tools. Each experiment is repeated three times and each test uses a new cutting insert to ensure accurate readings of the surface roughness. The statistical methods of signal to noise ratio (SNR) and the analysis of variance (ANOVA) are applied to investigate effects of cutting speed, feed rate and depth of cut on surface roughness. Results of this study indicate that the feed rate has the most significant effect on Ra and Rz. In addition, the effects of two factor interactions of the feed rate-cutting speed and depth of cut-cutting speed appear to be important. The developed model can be used in the metal machining industries in order to determine the optimum cutting parameters for minimum surface roughness. (C) 2011 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipSelcuk UniversitySelcuk Universityen_US
dc.description.sponsorshipThis study is supported by Scientific Research Projects Coordinators (BAP) of Selcuk University. This support is greatly appreciated.en_US
dc.identifier.doi10.1016/j.measurement.2011.07.003en_US
dc.identifier.endpage1704en_US
dc.identifier.issn0263-2241en_US
dc.identifier.issue9en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1697en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.measurement.2011.07.003
dc.identifier.urihttps://hdl.handle.net/20.500.12395/26318
dc.identifier.volume44en_US
dc.identifier.wosWOS:000295194900025en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCI LTDen_US
dc.relation.ispartofMEASUREMENTen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectHard turningen_US
dc.subjectTaguchi methoden_US
dc.subjectSurface roughnessen_US
dc.subjectDOEen_US
dc.titleDetermining the effect of cutting parameters on surface roughness in hard turning using the Taguchi methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu