Experimental and Numerical Analysis of one Dimensional Heat Transfer on Open Cell Aluminum Foams

dc.contributor.authorSertkaya, Ahmet Ali
dc.contributor.authorAteş, Ali
dc.contributor.authorAltınışık, Kemal
dc.contributor.authorDinçer, Kevser
dc.date.accessioned2020-03-26T19:05:58Z
dc.date.available2020-03-26T19:05:58Z
dc.date.issued2015
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, one dimensional heat transfer of open cell aluminum metal foams is investigated both experimentally and by using numerical methods as well. Open cell aluminum foams with pore densities of 10, 20 and 30 (Number of Pores Per Inch) PPI were shaped into heat exchangers. The foams having sizes of 200 x 100 x 20 mm were insulated on their three faces. Steady heat flux was maintained on the base section of the foam by heating a plate shaped coil electrically. Temperature distributions on the vertical sections and mostly on locations near heaters were measured with the thermocouples located on the aluminum foams. With the help of the recorded temperatures from the tests the graphs of open cell aluminum foams with pore densities of 10, 20 and 30 were plotted. First of all, one dimensional heat transfer equations were derived for the numerical solution of the system. The governing equations obtained were then discretized by using the Central Difference Method and finally solved with the Finite Difference Method. The results obtained were converted into graphs and compared with the empirical results obtained beforehand. The fastest drop in temperature close to the heater was observed at the foam with 10 PPI while the lowest falling rate took place at the foam with 30 PPI pore density. At an interval of three aluminum foams, the temperature difference was found to be higher near the heater and lower away from the heater. It was found that both experimental and numerical results are closely related.en_US
dc.identifier.endpage159en_US
dc.identifier.issn2147-1762en_US
dc.identifier.issue1en_US
dc.identifier.pmid#YOKen_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage149en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/32142
dc.identifier.volume28en_US
dc.identifier.wosWOS:000421186100016en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherGAZI UNIVen_US
dc.relation.ispartofGAZI UNIVERSITY JOURNAL OF SCIENCEen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectporous mediaen_US
dc.subjectopen-cell aluminum foamen_US
dc.subjectconvection-conduction heat transferen_US
dc.titleExperimental and Numerical Analysis of one Dimensional Heat Transfer on Open Cell Aluminum Foamsen_US
dc.typeArticleen_US

Dosyalar