Investigation of the tensile properties of continuous steel wire-reinforced gray cast iron composite

Basit Öğe Kaydı
dc.contributor.authorAkdemir, Ahmet
dc.contributor.authorKus, Recai
dc.contributor.authorSimsir, Mehmet
dc.date.accessioned2020-03-26T18:15:02Z
dc.date.available2020-03-26T18:15:02Z
dc.date.issued2011
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe aim of the present study was to improve the tensile properties of gray cast iron by reinforcing the material with a steel wire. The composite was produced by sand mold casting, and the specimens were normalized by applying heat treatments at 800 degrees C, 850 degrees C, and 900 degrees C. Tension tests were conducted on gray cast iron and composite specimens, and the microstructure of the specimens was examined with an optical microscope. The fracture surface of the tension test specimens was examined with a scanning electron microscope (SEM), and graphite-free transition regions with high degrees of hardness were observed due to the diffusion of carbon from the cast iron to the steel wire. The microstructure of the transition region (fine pearlitic phase with partially dissolved graphite flakes) and the bond quality in the transition region increased the tensile properties of cast iron composites. Also, it is concluded that the tensile properties of gray cast iron increased with an increase in the normalization temperature. (C) 2011 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipSelcuk University Scientific Research CenterSelcuk Universityen_US
dc.description.sponsorshipThe current study was presented as a Ph.D. Thesis by Recai KUS in the Graduate School of Natural and Applied Science, Selcuk University, Konya 2005 (in Turkish). The authors would like to thank the Selcuk University Scientific Research Center for financial support. The authors also acknowledge the Department of Metallurgical Education staff in Gazi University and Kocak Foundry Co.en_US
dc.identifier.doi10.1016/j.msea.2011.01.107en_US
dc.identifier.endpage3904en_US
dc.identifier.issn0921-5093en_US
dc.identifier.issue10.11.2020en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage3897en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.msea.2011.01.107
dc.identifier.urihttps://hdl.handle.net/20.500.12395/26588
dc.identifier.volume528en_US
dc.identifier.wosWOS:000288973800051en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE SAen_US
dc.relation.ispartofMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectCompositeen_US
dc.subjectGray cast ironen_US
dc.subjectHeat treatmenten_US
dc.subjectMechanical propertiesen_US
dc.subjectMicrostructureen_US
dc.subjectFractographyen_US
dc.titleInvestigation of the tensile properties of continuous steel wire-reinforced gray cast iron compositeen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu