Parametric optimization for machinability parameters of S960QL structural steel during milling by finite elements

Basit Öğe Kaydı
dc.authorid0000-0003-0775-3817en_US
dc.authorid0000-0003-0931-9643en_US
dc.authorid0000-0003-1553-581Xen_US
dc.contributor.authorBinali, Rüstem
dc.contributor.authorYaldız, Süleyman
dc.contributor.authorNeşeli, Süleyman
dc.date.accessioned2023-03-18T18:05:20Z
dc.date.available2023-03-18T18:05:20Z
dc.date.issued2022en_US
dc.departmentSelçuk Üniversitesi, Teknoloji Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractS960QL structural steel material is one of the materials used in armor and structural steel applications with its unique properties. However, the machinability of S960QL is difficult due to its high strength properties. Therefore, it is critical to determine the optimum machining parameters in milling to minimize the most influential machinability characteristics on cutting force, moment and temperature. In this study, three different feed rates (0.08-0.12-0.16 mm/tooth), three different radial depths (0.8-1.2-1.6 mm) and three different axial depths (4-6-8 mm) were applied and the finite element method was used milling experiments were carried out. ANOVA and statistical analyzes based on the “lowest and best” objective function were performed with the Minitab 18 program. It was determined that the optimum cutting parameters obtained as a result of the study were 0.8 mm radial depth, 4 mm axial depth and 0.08 mm/tooth feed rate. In addition, the lowest feed force value was obtained at A1B1D2 and the highest feed force value was obtained at A3B3D1 levels. In terms of moment and temperature values, the lowest value was determined at A1B1D1 and the highest value at A3B3D3 levels. Finally, according to the results of ANOVA analysis, the axial depth parameter was effective on the process feed force, and the axial depth parameter was effective on the moment and temperature.en_US
dc.identifier.citationBinali, R., Yaldız, S., Neşeli, S., (2022). Parametric optimization for machinability parameters of S960QL structural steel during milling by finite elements. Selcuk University Journal of Engineering Sciences, 21, (01), 26-31.en_US
dc.identifier.endpage31en_US
dc.identifier.issn2757-8828en_US
dc.identifier.issue01en_US
dc.identifier.startpage26en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/46143
dc.identifier.volume21en_US
dc.institutionauthorBinali, Rüstem
dc.institutionauthorYaldız, Süleyman
dc.institutionauthorNeşeli, Süleyman
dc.language.isoenen_US
dc.publisherSelçuk Üniversitesien_US
dc.relation.ispartofSelcuk University Journal of Engineering Sciencesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectFeed Forceen_US
dc.subjectMillingen_US
dc.subjectS960QLen_US
dc.subjectTaguchi Methoden_US
dc.subjectTemperatureen_US
dc.subjectTorqueen_US
dc.titleParametric optimization for machinability parameters of S960QL structural steel during milling by finite elementsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
584-2840-1-PB.pdf
Boyut:
287.97 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale dosyası
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

DERGİ YAYIN KOLEKSİYONU
Makine Mühendisliği/Makale Koleksiyonu