Fracture Behavior of Woven Steel Fiber Reinforced and Sand Particle Filled Polymer Composites

Basit Öğe Kaydı
dc.contributor.authorŞamancı, Ahmet
dc.date.accessioned2020-03-26T18:30:38Z
dc.date.available2020-03-26T18:30:38Z
dc.date.issued2012
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractWoven steel fiber reinforced with various weight fractions and particle-filled polymer composite beams were manufactured. After cure treatments, initial notches with various notch-to-depth ratios a/W = 0.1, 0.2, 0.3 and 0.4 were opened on the specimens. The fiber contents were 2%, 4% and 6%, and the polyester content was 16.5% of the total weight of the polymer composite system. Mode I fracture behavior of single edge notched composite specimens were investigated using three-point bending (TPB) tests. The critical stress intensity factors, (K-IC) of these specimens were determined by using several methods such as f-integral, initial notch depth and compliance method, and the results were compared. As the weight fractions of steel fibers increases, both K-IC and flexural strength of the composites increases.en_US
dc.description.sponsorshipBAP (The Scientific Research Projects Council of Selcuk University in Turkey)Selcuk Universityen_US
dc.description.sponsorshipThe author would like to thank BAP (The Scientific Research Projects Council of Selcuk University in Turkey) for supporting this study.en_US
dc.identifier.citationSamanci, A., (2012). Fracture Behavior of Woven Steel Fiber Reinforced and Sand Particle Filled Polymer Composites. Constructıon and Building Materıals, 26(1), 167-171. doi:10.1016
dc.identifier.doi10.1016/j.conbuildmat.2011.06.006en_US
dc.identifier.endpage171en_US
dc.identifier.issn0950-0618en_US
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage167en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.conbuildmat.2011.06.006
dc.identifier.urihttps://hdl.handle.net/20.500.12395/28076
dc.identifier.volume26en_US
dc.identifier.wosWOS:000295754200020en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCI LTDen_US
dc.relation.ispartofConstructıon and Buıldıng Materıalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectPolymer-matrix composites (PMCs)en_US
dc.subjectFracture toughnessen_US
dc.subjectWoven steel fiber reinforceden_US
dc.subjectJ-integralen_US
dc.subjectComplianceen_US
dc.titleFracture Behavior of Woven Steel Fiber Reinforced and Sand Particle Filled Polymer Compositesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
28076.pdf
Boyut:
721.4 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu