EFFECT OF INTERRUPTED BORIDING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 16MnCr5 STEELS

Basit Öğe Kaydı
dc.contributor.authorCalik, A.
dc.contributor.authorUcar, N.
dc.contributor.authorKocaslan, A.
dc.contributor.authorKarakas, S.
dc.date.accessioned2020-03-26T19:53:32Z
dc.date.available2020-03-26T19:53:32Z
dc.date.issued2018
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe microstructure, microhardness and tensile properties of continuously borided and interrupted borided 16MnCr5 steel were compared. In the continuous process, boriding was carried out continuously at 1273 K for 16 h. In the interrupted process, after 5 h of boriding at 1273 K, the crucible containing the specimens and the boriding powders was removed from the furnace and cooled to 873 K in still air for 30 min and this procedure was repeated three times. Both boriding treatments were achieved in a solid medium using the powder pack method with commercial Ekabor-I powders as the boron source. X-ray diffraction studies indicated the presence of FeB and Fe2B phases in the boride layers for both boriding treatments. The transition zone was more pronounced in the continuously borided steel. The average hardness values of the boride layers were 1759 and 1648HV(0.1) for the continuously borided and interrupted borided steels, respectively. The hardness of the boride layers were considerably higher than the 200HV(0.1) hardness of the untreated steel. No significant difference in tensile properties could be observed between the two different boriding procedures.en_US
dc.description.sponsorshipScientific Research Projects Coordination Unit of Suleyman Demirel UniversitySuleyman Demirel University [SDU-BAP 4027-YL1-14]en_US
dc.description.sponsorshipThis study was supported by the Scientific Research Projects Coordination Unit of Suleyman Demirel University (Project reference number: SDU-BAP 4027-YL1-14).en_US
dc.identifier.doi10.1142/S0218625X19500227en_US
dc.identifier.issn0218-625Xen_US
dc.identifier.issn1793-6667en_US
dc.identifier.issue7en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.urihttps://dx.doi.org/10.1142/S0218625X19500227
dc.identifier.urihttps://hdl.handle.net/20.500.12395/36532
dc.identifier.volume25en_US
dc.identifier.wosWOS:000448273900016en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWORLD SCIENTIFIC PUBL CO PTE LTDen_US
dc.relation.ispartofSURFACE REVIEW AND LETTERSen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectInterrupted boridingen_US
dc.subjecttensile strengthen_US
dc.subjecthardnessen_US
dc.subjecttransition zoneen_US
dc.subjectsurface hardeningen_US
dc.titleEFFECT OF INTERRUPTED BORIDING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 16MnCr5 STEELSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu