DETERMINATION OF THE EFFECT OF EDGE BANDING THICKNESS AND AGING PERIOD ON THE MOR AND MOE OF MELAMINE COATED PARTICLE BOARD USING TAGUCHI METHOD
Küçük Resim Yok
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
UNIV OSIJEK, TECH FAC
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, the aging period (20, 30, 40 and 50 days), the edge banding thickness (0,4; 0,8;1,0 and 2,0 mm) and the type of force used (bending strength-MOR and tensile strength-MOE) were the parameters selected for analysis of the effects on the mechanical properties of melamine coated particle board. To do this, Taguchi's methodology for the design of experiments was used to optimize the process parameters. Trials are conducted using an L-16 orthogonal array with 16 combinations of test variables to assess the influence of various factors. Analysis of variance was also employed to investigate which design parameters significantly affect the mechanical properties of melamine coated particle board. The statistical analysis showed that the type of force used was the most significant factor affecting the response. The simulated and experimental results also showed good agreement with each other.
Açıklama
Anahtar Kelimeler
aging, bending and tensile strength, Taguchi method, wood composite
Kaynak
TEHNICKI VJESNIK-TECHNICAL GAZETTE
WoS Q Değeri
Q3
Scopus Q Değeri
Q3
Cilt
23
Sayı
4
