Determination of Natural Flow Rates of Some Chickpea Varieties on Different Surfaces and Surface Angles

Basit Öğe Kaydı
dc.authorid0000-0002-2403-661Xen_US
dc.authorid0000-0001-9699-8861en_US
dc.authorid0000-0002-8704-9899en_US
dc.contributor.authorÇiftçi, Yusuf
dc.contributor.authorDokumacı, Keziban Yalçın
dc.contributor.authorSonmete, Mehmet Hakan
dc.date.accessioned2023-08-06T13:07:32Z
dc.date.available2023-08-06T13:07:32Z
dc.date.issued2021en_US
dc.departmentSelçuk Üniversitesi, Ziraat Fakültesi, Tarım Makinaları ve Teknolojileri Mühendisliği Bölümüen_US
dc.description.abstractIn this study, some physical properties of Gökçe chickpea (registered variety) and Spanish chickpea (local population) variety cultivated in Konya Province were determined. Flow rates of chickpea varieties were detected at four different conveyor channel angles (24°, 28°, 32° and 36°) and on three different surfaces (galvanized sheet, painted sheet and steel sheet surfaces). Length, width, thickness, geometric mean diameter, sphericity, repose angle, thousand grain weight, bulk density values of Gökçe chickpeas at 8.90% moisture level are 10.09 mm, 7.34 mm, 7.74 mm and 8.30 mm, 0.82, 18.04°, 364.6 g and 746.82 kg m-3 and for Spanish variety at 10.40% moisture level are 12.16 mm, 8.22 mm, 9.01 mm, 9.65 mm, 0.79, 16.01°, 481.96 g, 690.21 kg m-3 were determined respectively. These varieties, the static friction coefficient values on galvanized sheet, painted sheet and steel sheet surfaces were found to be 0.335 and 0.351, 0.401 and 0.445, 0.388 and 0.435, respectively. Flow rates increased as the channel conveyor angle increased on galvanized sheet, painted sheet and steel sheet surfaces. The increase rates for Gökçe and Spanish chickpeas on these surfaces were 207% and 189%, 630% and 522%, 291% and 202%, respectively. When the surface averages are taken into account, average flow rates of 1.69 kg s-1 on the galvanized sheet surface, 1.24 kg s-1 on the painted sheet surface and 1.54 kg s-1 on the steel sheet surface were obtained and found to be statistically significant. The difference between the surfaces is due to the roughness values of the surfaces. The lowest average roughness value was found on the galvanized sheet surface (1.13 µm), and the highest on the painted surface (2.06 µm). According to the triple interaction results, the highest flow rate value was obtained on the galvanized sheet surface and the conveyor angle of 36° in both chickpea varieties, and the lowest flow values were obtained at the conveyor angle of 24° on the painted sheet surface.en_US
dc.identifier.citationÇiftçi, Y., Dokumacı, K. Y., Sonmete, M. H., (2021). Determination of Natural Flow Rates of Some Chickpea Varieties on Different Surfaces and Surface Angles. Selcuk Journal of Agriculture and Food Sciences, 35(3), 259-264. DOI: 10.15316/SJAFS.2021.255en_US
dc.identifier.doi10.15316/SJAFS.2021.255en_US
dc.identifier.endpage264en_US
dc.identifier.issn2458-8377en_US
dc.identifier.issue3en_US
dc.identifier.startpage259en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/49244
dc.identifier.volume35en_US
dc.institutionauthorÇiftçi, Yusuf
dc.institutionauthorDokumacı, Keziban Yalçın
dc.institutionauthorSonmete, Mehmet Hakan
dc.language.isoenen_US
dc.publisherSelçuk Üniversitesien_US
dc.relation.ispartofSelcuk Journal of Agriculture and Food Sciencesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectChickpeaen_US
dc.subjectNatural flow rateen_US
dc.subjectPhysical propertiesen_US
dc.subjectSurface angleen_US
dc.subjectSurface materialen_US
dc.titleDetermination of Natural Flow Rates of Some Chickpea Varieties on Different Surfaces and Surface Anglesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
sjafs310.pdf
Boyut:
638.44 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Dergi Yayın Koleksiyonu
Tarım Makineleri ve Teknoloji Mühendisliği/Makale Koleksiyonu