SOME MECHANICAL PROPERTIES OF SAFFLOWER STALK

Basit Öğe Kaydı
dc.contributor.authorOezbek, O.
dc.contributor.authorSeflek, A. Y.
dc.contributor.authorCarman, K.
dc.date.accessioned2020-03-26T17:40:10Z
dc.date.available2020-03-26T17:40:10Z
dc.date.issued2009
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractGeneral physical properties, bending stress, modulus of elasticity, compressive strength, shearing stress, and specific shearing energy were determined for safflower (Carthamus tinctorius L.) stalks. Test specimens were taken front two locations of the stalk: front the bottom and front the top region. Experiments were conducted in five different moisture contents of stalk. The bending stress decreased with increasing moisture content. The average bending stress value varied between 54.02 and 13.81 MPa. The modulus of elasticity in bending decreased with increases at the moisture content and the modulus of elasticity increased towards the top region. The average modulus of elasticity varied between 439.49 and 95.62 MPa. The modulus of tangent in compressing decreased as the moisture content increased. The average tangent modulus varied between 31.39 and 6.35 daNmm(-1). The shearing stress and the specific shearing energy increased with increasing moisture content. The maximum shearing stress and the specific shearing energy were 1.37 MPa and 94.64 mJmm(-2) respectively. Both the shearing stress and specific shearing energy were found to be higher in the bottom region of the stalk.en_US
dc.description.sponsorshipSelcuk University Research Found (BAP)Selcuk Universityen_US
dc.description.sponsorshipThe authors gratefully acknowledge the Selcuk University Research Found (BAP) for support.en_US
dc.identifier.endpage625en_US
dc.identifier.issn0883-8542en_US
dc.identifier.issn1943-7838en_US
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage619en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/23857
dc.identifier.volume25en_US
dc.identifier.wosWOS:000269021300019en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherAMER SOC AGRICULTURAL & BIOLOGICAL ENGINEERSen_US
dc.relation.ispartofAPPLIED ENGINEERING IN AGRICULTUREen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectSaffloweren_US
dc.subjectBending stressen_US
dc.subjectModulus of elasticityen_US
dc.subjectTangent modulusen_US
dc.subjectShearing stressen_US
dc.subjectSpecific shearing energyen_US
dc.titleSOME MECHANICAL PROPERTIES OF SAFFLOWER STALKen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu