Optimisation of parameters affecting surface roughness of Co28Cr6Mo medical material during CNC lathe machining by using the Taguchi and RSM methods

Basit Öğe Kaydı
dc.contributor.authorAsilturk, Ilhan
dc.contributor.authorNeseli, Suleyman
dc.contributor.authorInce, Mehmet Alper
dc.date.accessioned2020-03-26T19:25:31Z
dc.date.available2020-03-26T19:25:31Z
dc.date.issued2016
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThis study involves modelling of experimental data of surface roughness of Co28Cr6Mo medical alloy machined on a CNC lathe based on cutting parameters (spindle rotational speed, feed rate, depth of cut and tool tip radius). In order to determine critical states of the cutting parameters variance analysis (ANOVA) was applied while optimisation of the parameters affecting the surface roughness was achieved with the Response Surface Methodology (RSM) that is based on the Taguchi orthogonal test design. The validity of the developed models necessary for estimation of the surface roughness values (Ra, Rz), was approximately 92%. It was found that for Ra 38% of the most effective parameters is on the tool tip radius, followed by 33% on the feed rate whereas for Rz tool tip radius occupied 43% with the feed being at 33% rate. To achieve the minimum surface roughness, the optimum values obtained for spindle rpm, feed rate, depth of cut and tool tip radius were respectively, 318 rpm, 0.1 mm/rev, 0.7 mm and 0.8 mm. (C) 2015 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipScientific Research Projects Coordinators (BAP) of Selcuk UniversitySelcuk Universityen_US
dc.description.sponsorshipThis study is supported by Scientific Research Projects Coordinators (BAP) of Selcuk University. Their support is greatly appreciated.en_US
dc.identifier.doi10.1016/j.measurement.2015.09.052en_US
dc.identifier.endpage128en_US
dc.identifier.issn0263-2241en_US
dc.identifier.issn1873-412Xen_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage120en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.measurement.2015.09.052
dc.identifier.urihttps://hdl.handle.net/20.500.12395/33860
dc.identifier.volume78en_US
dc.identifier.wosWOS:000365105400013en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCI LTDen_US
dc.relation.ispartofMEASUREMENTen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectResponse surface methodologyen_US
dc.subjectOrthogonal designen_US
dc.subjectCo28Cr6Moen_US
dc.subjectSurface roughnessen_US
dc.subjectVariance analysis (ANOVA)en_US
dc.titleOptimisation of parameters affecting surface roughness of Co28Cr6Mo medical material during CNC lathe machining by using the Taguchi and RSM methodsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu