Fatigue failure analysis of surface-cracked (+/- 45 degrees)(3) filament-wound GRP pipes under internal pressure

Basit Öğe Kaydı
dc.contributor.authorSamancı, Ahmet
dc.contributor.authorTarakcioğlu, Necmettin
dc.contributor.authorAkdemir, Ahmet
dc.date.accessioned2020-03-26T18:25:48Z
dc.date.available2020-03-26T18:25:48Z
dc.date.issued2012
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, the fatigue behavior of (+/- 45 degrees)(3) filament-wound composite pipes with a surface crack under alternating internal pressure was investigated. Glass-reinforced plastic (GRP) pipes were made of E-glass/epoxy and tested in the open-ended condition. The pipes had a surface crack with a notch-aspect ratio of a/t = 0.2 and notch-to-thickness ratios of a/t = 0.25, 0.38, or 0.50 in the axial direction. Tests were carried out in accordance with ASTM D2992. This standard offers 25 cycles/min and a load ratio of R = 0.05. Tests were performed at three different load levels: 50%, 40%, and 30% of ultimate hoop stress. Whitening, leakage, and final failure of GRP pipes were observed, and fatigue test results were presented by means of S-N curves.en_US
dc.description.sponsorshipCoordination Committee of Scientific Research of Selcuk UniversitySelcuk University [2003-45]en_US
dc.description.sponsorshipThe authors acknowledge the support of the Coordination Committee of Scientific Research projects of Selcuk University, Project no: 2003-45.en_US
dc.identifier.doi10.1177/0021998311414945en_US
dc.identifier.endpage1050en_US
dc.identifier.issn0021-9983en_US
dc.identifier.issn1530-793Xen_US
dc.identifier.issue9en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1041en_US
dc.identifier.urihttps://dx.doi.org/10.1177/0021998311414945
dc.identifier.urihttps://hdl.handle.net/20.500.12395/28058
dc.identifier.volume46en_US
dc.identifier.wosWOS:000303832300004en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSAGE PUBLICATIONS LTDen_US
dc.relation.ispartofJOURNAL OF COMPOSITE MATERIALSen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectpolymer-matrix composites (PMCs)en_US
dc.subjectfatigueen_US
dc.subjectfilament windingen_US
dc.subjectsurface cracken_US
dc.subjectGRP pipeen_US
dc.subjectinternal pressureen_US
dc.titleFatigue failure analysis of surface-cracked (+/- 45 degrees)(3) filament-wound GRP pipes under internal pressureen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu