Color Stability of CAD/CAM Fabricated Inlays after Accelerated Artificial Aging
Küçük Resim Yok
Tarih
2016
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
WILEY
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
PurposeTo investigate the influence of accelerated artificial aging on the color stability of three different inlay restorations produced with a CAD/CAM system. Materials and MethodsThirty non-carious human mandibular molar teeth were used. The teeth were embedded in autopolymerizing acrylic resin blocks. Standard Class I inlay cavities were prepared, and the teeth were randomly divided into three groups (n = 10) to fabricate inlay restorations: (1) a feldspathic-ceramic group, (2) a resin nano-ceramic group, and (3) a leucite glass-ceramic group. Optical impressions were made with CEREC software, and the restorations were designed and then milled. The inlays were adhesively cemented with a dual-polymerizing resin cement and left in distilled water at room temperature for 1 week. Color measurements were performed with a spectrophotometer before and after accelerated aging in a weathering machine with a total energy of 150 kJ/m(2). Changes in color (E, L, a, b, C) were determined using the CIE L*a*b* system. The results were assessed using a one-way ANOVA and Tukey's HSD test (p = 0.05). ResultsThe color changes of the materials ranged from 2.1 to 9.29. The highest color change was seen in the resin nano-ceramic material. This change was not clinically acceptable (E > 5.5). No significant differences were found in the L and a values of the test groups. ConclusionsColor changes were observed in each evaluated material after accelerated aging. All CAD/CAM inlays became darker in appearance, more saturated, a little reddish, and more yellow.
Açıklama
Anahtar Kelimeler
Ceramic, inlay, CAD, CAM, color stability, accelerated aging
Kaynak
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
25
Sayı
6
