Design, Development and Testing of a Turning Dynamometer for Cutting Force Measurement
Yükleniyor...
Dosyalar
Tarih
2006
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this study, a turning dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer, respectively, has been designed and developed. The orientation of octagonal rings and strain gauge locations has been determined to maximize sensitivity and to minimize cross-sensitivity. The developed dynamometer is connected to a data acquisition system. Cutting force signals were captured and transformed into numerical form and processed using a data acquisition system consisting of necessary hardware and software running on MS-Windows based personal computer. The obtained results of machining tests performed at different cutting parameters showed that the dynamometer could be used reliably to measure cutting forces. Although the dynamometer was developed primarily for turning operations, it can be used to measure cutting forces during nearly all machining operations (milling, drilling, etc.).
Açıklama
Anahtar Kelimeler
C-dynamometer, G-strain gauge, G-data acquisition, engineering design
Kaynak
Materials & Design
WoS Q Değeri
Q3
Scopus Q Değeri
N/A
Cilt
27
Sayı
Künye
Yaldız, S., Ünsaçar, F., (2006). Design, Development and Testing of a Turning Dynamometer for Cutting Force Measurement. Materials & Design, (27), 839-846. Doi: 10.1016/j.matdes.2005.04.001
