Design, Development and Testing of a Turning Dynamometer for Cutting Force Measurement

Basit Öğe Kaydı
dc.contributor.authorYaldız, Süleyman
dc.contributor.authorÜnsaçar, Faruk
dc.date.accessioned2020-03-26T17:03:19Z
dc.date.available2020-03-26T17:03:19Z
dc.date.issued2006
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, a turning dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer, respectively, has been designed and developed. The orientation of octagonal rings and strain gauge locations has been determined to maximize sensitivity and to minimize cross-sensitivity. The developed dynamometer is connected to a data acquisition system. Cutting force signals were captured and transformed into numerical form and processed using a data acquisition system consisting of necessary hardware and software running on MS-Windows based personal computer. The obtained results of machining tests performed at different cutting parameters showed that the dynamometer could be used reliably to measure cutting forces. Although the dynamometer was developed primarily for turning operations, it can be used to measure cutting forces during nearly all machining operations (milling, drilling, etc.).en_US
dc.identifier.citationYaldız, S., Ünsaçar, F., (2006). Design, Development and Testing of a Turning Dynamometer for Cutting Force Measurement. Materials & Design, (27), 839-846. Doi: 10.1016/j.matdes.2005.04.001
dc.identifier.doi10.1016/j.matdes.2005.04.001en_US
dc.identifier.endpage846en_US
dc.identifier.issn0261-3069en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage839en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.matdes.2005.04.001
dc.identifier.urihttps://hdl.handle.net/20.500.12395/20422
dc.identifier.volume27en_US
dc.identifier.wosWOS:000239911000004en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorYaldız, Süleyman
dc.institutionauthorÜnsaçar, Faruk
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectC-dynamometeren_US
dc.subjectG-strain gaugeen_US
dc.subjectG-data acquisitionen_US
dc.subjectengineering designen_US
dc.titleDesign, Development and Testing of a Turning Dynamometer for Cutting Force Measurementen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
20422.pdf
Boyut:
253.28 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği/Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu