Bond strength of adhesively luted ceramic discs to different core materials

Basit Öğe Kaydı
dc.contributor.authorBozogullari, Nalan
dc.contributor.authorInan, Ozgur
dc.contributor.authorUsumez, Aslihan
dc.date.accessioned2020-03-26T17:37:58Z
dc.date.available2020-03-26T17:37:58Z
dc.date.issued2009
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe purpose of this in vitro study was to compare the shear bond strengths of resin, glass-ionomer, and ceramic-based core materials to all ceramic discs. Five core materials (Core max, Sankin; Clearfil AP-X, Kuraray; Empress Cosmo, Ivoclar-Vivadent; Photocore, Kuraray; Dyract Extra, Dentsply) were prepared as discs 10 mm in diameter and 2 mm in height according to the manufacturer's instructions. Ten disc specimens per group were prepared, and dentin served as the control. All resin specimens were embedded in autopolymerizing acrylic resin, with one surface facing up. All ceramic discs (IPS Empress I, Ivoclar-Vivadent) 3 mm in diameter and 2 mm in height were prepared and bonded to core specimens with a dual-curing luting resin cement (Variolink II, Vivadent). Specimens were stored in distilled water at 37 degrees C. Shear bond strength of each sample was measured after 24 h using a universal testing machine at a crosshead speed of 0.5 mm/min. The data were analyzed with one-way analysis of variance and Tukey HSD tests (alpha=0.05). Shear bond strength varied significantly depending on the core material used (p<0.05). Clearfil AP-X and Photocore showed the highest shear bond strength value while Empress Cosmo provided the lowest (p<0.05). There were no statistically significant differences among Clearfil AP-X, Photocore, and Core-Max (p>0.05). And also there were no statistically significant differences between Dyract Extra and the control group (p>0.05). In vitro shear bond strengths of ceramic discs bonded to resin-based core materials showed higher bond strength values than ceramic-based core material. (C) 2008 Wiley Periodicals, Inc. J Biomed Mater Res 89A: 466-471, 2009en_US
dc.identifier.doi10.1002/jbm.a.32005en_US
dc.identifier.endpage471en_US
dc.identifier.issn1549-3296en_US
dc.identifier.issn1552-4965en_US
dc.identifier.issue2en_US
dc.identifier.pmid18431756en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage466en_US
dc.identifier.urihttps://dx.doi.org/10.1002/jbm.a.32005
dc.identifier.urihttps://hdl.handle.net/20.500.12395/23325
dc.identifier.volume89Aen_US
dc.identifier.wosWOS:000264850200019en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.language.isoenen_US
dc.publisherWILEYen_US
dc.relation.ispartofJOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART Aen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectceramicen_US
dc.subjectglass-ionomeren_US
dc.subjectcomposite resinen_US
dc.titleBond strength of adhesively luted ceramic discs to different core materialsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu