A Dynamometer Design for Measurement the Cutting Forces on Turning
Yükleniyor...
Tarih
2006
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The cutting forces generated in metal cutting have a direct influence on generation heat. tool wear or failure, quality of machined surface and accuracy of the work piece. In this study, a turning dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer respectively has been designed and constructed. The orientation of octagonal rings and strain gauge locations has been determined to maximize sensitivity and to minimize cross-sensitivity. The force signals were captured and processed using proper data acquisition system. The dynamometer has been subjected to a series of tests to determine its static and dynamic characteristics. The results obtained showed that the dynamometer could be used reliably to measure static and dynamic cutting forces.
Açıklama
Anahtar Kelimeler
Dynamometer, Strain gauge, Data acquisition, Turning
Kaynak
Measurement
WoS Q Değeri
Q3
Scopus Q Değeri
Q1
Cilt
39
Sayı
1
Künye
Yaldız, S., Ünsaçar, F., (2006). A Dynamometer Design for Measurement the Cutting Forces on Turning. Measurement, 39(1), 80-89. Doi:10.1016/j.measurement.2005.07.008
